testtest
T
Reaction score
2

Profile posts Postings About

  • can you use the screws that come with the shield s m s c to mount it on the hellcat or do you need the ones from Springfield seem a video and said not to use the ones that come with the shield
    L
    Lock n' Load
    While waiting for my Shield RMSc to be delivered, I bought the screws from Springfield just to be safe. They arrived in a few days. The install was easy with a little drop of blue Loctite on each screw and the optic is on firmly with no looseness after about 800 rounds. Torque to the 15.49 psi Shield recommends and you're good to go. You may have to cut the screws supplied with the Shield optic if you use them.
    • Like
    Reactions: BobM
    OkiePewPew
    OkiePewPew
    I used the screws included with the smsc. Remember not to over-tighten and check for pistol function (unloaded) after install. Make sure the slide moves freely and trigger functions as before. As Locknload said you can get a set from Springfield for $5 too.
    Screws should be
    M4 x .07 x 7.5mm
    L
    Lock n' Load
    Thanks OkiePewPew! Glad to hear you got the right screws. I read so many posts on the forum about having to cut the Shield supplied screws that I bought the Springfield screws to avoid that. For $5, it was worth it to me for peace of mind.
    • Like
    Reactions: BobM
  • Loading…
  • Loading…
Back
Top