Derrick H.
Alpha
Im having a problem when trying to chamber a round the ejector will stay behind the round and not let slide close it is also moving the next round in mag forward. Any advice welcome new the SA family
More info, please!Im having a problem when trying to chamber a round the ejector will stay behind the round and not let slide close it is also moving the next round in mag forward. Any advice welcome new the SA family
More info, please!
That is most likely what i will be doing.1. Springfield Armory’s customer service representatives can answer your questions/concerns Monday through Friday 8:30 to 4:30 CST via phone at 1-800-680-6866, International: +1-309-944-5631 or email at sales@springfield-armory.com.
2. I believe I’ve seen a few people taking about this on the Springfield 911 Facebook page. The guy sent it in and got it back shortly after. The extractor was adjusted and a polish was done if I’m not mistaken. He hasn’t had a problem sense.
Yes, both the 6&7 rd mags that came with and another 7rd bought all oemHave you tried a different magazine?
As Hans mentioned above Definitely don’t load your mag to max capacity, all my Mod2’s work/cycle better one round short then max.
Yes have been running the mags full will try rd shortIs the mag at full capacity? If so, try reducing it by one round, see if it happens again.
And if you aren’t, lock the slide to the rear, and load by dropping the slide catch release.
The rounds are all seated when mag is inserted into well,no to riding the slide however i think that i found a drag spot between slide and frame when drawing slide backabout half way back it hits same drag going forward with or without mag so just gonna send it inYou aren’t riding the slide by chance and also all your rounds are fully “seated” before you insert the magazine? Once I load my magazine I will hit the palm of my hand to make sure they are seated.