testtest

Chamber Safety Flags

Lo-Profile

Master Class
Who uses them, Why / Why not ???
I use them in all my semi automatic guns.
I just like being able to 100% know the chamber is unloaded without physically checking.
Bought them initially for use going to indoor ranges so the employees aren't fondling my guns.
Pistols, rifles and shotguns
1000010674.png
 
Who uses them, Why / Why not ???
I use them in all my semi automatic guns.
I just like being able to 100% know the chamber is unloaded without physically checking.
Bought them initially for use going to indoor ranges so the employees aren't fondling my guns.
Pistols, rifles and shotguns
View attachment 91505
Never used them in my life
Thrown away with the box and gun lock
 
I have some in my range bag but I rarely if ever use them.

The last time I did I took my Glock to a gun shop to have sights installed.

I had a chamber flag in the gun that was so long the tail stuck out the muzzle..

I opened up my case and pointed to the magazine well and said " You see there's no magazine in the gun."

Then I pointed out the chamber flag at the chamber and the muzzle and said "You see the chamber flag, the pistol is unloaded."

The guy looked at me like I nuts and removed the chamber flag and looked at the chamber.

I get there's never too much safety but you can't load the chamber with a chamber flag in the gun.
 
Hi,

Chamber flags were required on the firing line at one outdoor public range I used to frequent. At every cease fire all shooters had to clear their guns, drop magazines, chambers open, slides locked back, with flags inserted, then RSOs would check the entire line, before we could go downrange to inspect or change our targets. I didn't mind. I still have a lot of chamber flags but don't use them as often.


Thank you for your indulgence,

BassCliff
 
I usually use them.
Most of the matches I’ve shot require the use of them so I got in the habit.

I like them. It’s a quick way to verify an open action.

I started having the 4-H kids use them. We always have a variety of guns on the tables (different action types, lengths, etc) so it makes it a lot easier to verify that many guns are open and clear. If nothing else, it gets them to place the gun with the ejection port up.

I make them from a piece of string trimmer line and a square of bright colored duct tape for a flag.

Airguns get a full-length flag, CBI- Clear Bore Indicator. The trimmer string is long enough to stick out the muzzle and breech.
With an airgun, a pellet could be stopped anywhere along the length of the barrel, and the next kid could come along, and still have a “live” gun without knowing it.
 
Who uses them, Why / Why not ???
I use them in all my semi automatic guns.
I just like being able to 100% know the chamber is unloaded without physically checking.
Bought them initially for use going to indoor ranges so the employees aren't fondling my guns.
Pistols, rifles and shotguns
View attachment 91505
i bought a bunch of them, 1 for every gun that i own, and keep each in the pouch the gun and mags are in..the state run outdoor range requires them, they even provide a "thin weed whacker" line, so thin, you can hardly see it..., mine are bigger and thicker.

at the indoor range, if i have to go to the bathroom, i stick 1 in the chamber, pull back the slide and face the gun down range.

at my club, i am the only person there, so no need.
 
Back
Top