testtest

Disassembly of the COG on a Springfield Echelon with a manual safety.

C

Cobra6

Alpha
I just purchased the Echelon with the manual safety (apparently very rare). There are no videos that I can locate that show the disassembly of the COG that is designed to accommodates the manual safety from the frame. Can anyone advise me how to properly take it off of the frame and replace it. I tried on my own, but once reassembled, the trigger will not operate.

Thanks,

Cobra6
 
Key Difference/Tip for Manual Safety Models
User reports (from owners who have swapped or modified manual safety Echelons) indicate that COG removal and reinstallation is easiest when the manual safety levers are rotated slightly upward past the "safe" detent position.
This aligns the internal safety bar properly with the COG's channel/cutout, preventing binding.
The safety bar is captured in the COG housing and interacts via slots.
Standard position might cause slight interference, but the "past detent" rotation frees it up.
Once positioned, the COG lifts out normally.

Springfield Video (without Manual safety)


Springfield Armory Support

support.springfield-armory.com support.springfield-armory.com

XDMan Video also without the Manual Safety

 
You must log in or register to reply here.
Back
Top