TEXASforLIFE
SAINT
Ok. What's your thoughts on this 1? Found 1 for $750.
PPQ Q5 match
- Thread starter TEXASforLIFE
- Start date
TEXASforLIFE
SAINT
3 mags and mounting 3 mounting plates included
TEXASforLIFE
SAINT
This 1 has the blue trigger also
Model 457
Master Class
I have a buddy that has one. It seems to me he paid over a grand for it. I shot it once at the range. It had an excellent trigger pull and I'm pretty sure a skilled shooter could do some damage with it.
BET7
Ronin
Not a bad deal TFL. I bought a used one (polymer frame) for $750 that also came with a Vortex Venom RDS installed. It came with all the plates if I want to change optics in the future, and three mags. The LGS wanted $899.95, but being a good customer of theirs, they reduced it to $750.
It shot well as I compared it to the PDP Match Steel frame I also bought. Surprisingly there wasn't much difference between the Polymer Vs Steel in felt recoil (to me at least), & both very accurate. The PDP Match (I also have the PDP Compact polymer model), came with card for free plate which I selected (RMR) for a Trijicon SRO optic I already had (but haven't yet mounted).
TEXASforLIFE
SAINT
BET7
Ronin
Yup
, see my post above.
TEXASforLIFE
SAINT
It wasn't there when I postedYup
TEXASforLIFE
SAINT
Didn't come with an optic on this 1
Bassbob
Emissary
I put a Venom on mine. I now have about 7 mags, all 17 rounders I think. They may be 15s.
Belt Fed
Ronin
Really, That's like asking a gun shop if they sell guns.
BET7
Ronin
Probably why my LGS originally wanted $899.95 for it. I'll also say that the person that had this prior really did a good job cleaning & lubing it before selling it. Before I shoot a new or used gun, I break it down and clean it and this gun really didn't need it. The battery was real weak in the optic, so I ended up replacing that with a new one and it was good to go.
SimonRL
Ronin
Is it the steel frame? If yes and it’s in good shape buy it. Used, they typically go for $1k. I have one and I never shoot it, even though it’s a great gun. I keep it because it’s probably the best looking gun I own.
If it’s the polymer version, that’s too much.
Pitdogg2
Professional
First thing you do is throw that junk plastic rod away, save the spring. Get one of these.
zrtacticalsolutions.com
benstoegerproshop.com
I know many will say there's nothing wrong with the factory, I'm here to tell you Walther will NOT stand behind them.
My son's blew a part after 6 months. Called Walther and they told him nothing they can do about it, it's plastic it can happen.
Walther PPQ & PDP Captured Guide Rod
One piece stainless guide rod for Walther PPQ line
zrtacticalsolutions.com
Sprinco 4" Walther PDP/PPQ/Q4 9mm Recoil Management Guide Rod System
Sprinco 4" Walther PDP/PPQ/Q4 9mm Recoil Management Guide Rod System (19176)
benstoegerproshop.com
I know many will say there's nothing wrong with the factory, I'm here to tell you Walther will NOT stand behind them.
My son's blew a part after 6 months. Called Walther and they told him nothing they can do about it, it's plastic it can happen.
TEXASforLIFE
SAINT
I've been replacing many rods with tungsten or ss if tungsten isn't available.First thing you do is throw that junk plastic rod away, save the spring. Get one of these.
Walther PPQ & PDP Captured Guide Rod
One piece stainless guide rod for Walther PPQ line
Sprinco 4" Walther PDP/PPQ/Q4 9mm Recoil Management Guide Rod System
Sprinco 4" Walther PDP/PPQ/Q4 9mm Recoil Management Guide Rod System (19176)
I know many will say there's nothing wrong with the factory, I'm here to tell you Walther will NOT stand behind them.
My son's blew a part after 6 months. Called Walther and they told him nothing they can do about it, it's plastic it can happen.
Bassbob
Emissary
The one thing I haven't done to mine, but then I can't recall the last time I shot it. It has 200 rounds through it at most. It's not really a carry gun so it doesn't get much love around here.First thing you do is throw that junk plastic rod away, save the spring. Get one of these.
Walther PPQ & PDP Captured Guide Rod
One piece stainless guide rod for Walther PPQ line
Sprinco 4" Walther PDP/PPQ/Q4 9mm Recoil Management Guide Rod System
Sprinco 4" Walther PDP/PPQ/Q4 9mm Recoil Management Guide Rod System (19176)
I know many will say there's nothing wrong with the factory, I'm here to tell you Walther will NOT stand behind them.
My son's blew a part after 6 months. Called Walther and they told him nothing they can do about it, it's plastic it can happen.