testtest

GLOCKSTORE SLIDE CUTTING FOR OPTICS

Annihilator

Annihilator

Hellion
Founding Member
Great service from a good company, Glockstore will do a optic cut on your non-OSP slides for your Glocks, I have purchased lots of parts and accessories from them over the years.

americanhandgunner.com

GlockStore Optics Cutting

Got a GLOCK? Not a MOS optics-ready version? No problem. GlockStore is offering a quick turnaround slide-cutting service to make your classic GLOCK slide optics ready.
americanhandgunner.com americanhandgunner.com
 
Direct slide mounting without plates is the only way to run a Red Dot.

That said if you have a non MOS slide milled you might see a unique malfunction. Dave Spaulding mentioned it in his class and sure enough a few of them happened with non MOS that were aftermarket milled. The optic is a little farther forward than an MOS version and spent brass would get trapped backward in the ejection port after bouncing off the optic. This keeping the slide opened the length of the brass.

Wasn’t a chronic issue but happened enough Dave mentioned it and we saw it!
 
ECS686 said:
Direct slide mounting without plates is the only way to run a Red Dot.

That said if you have a non MOS slide milled you might see a unique malfunction. Dave Spaulding mentioned it in his class and sure enough a few of them happened with non MOS that were aftermarket milled. The optic is a little farther forward than an MOS version and spent brass would get trapped backward in the ejection port after bouncing off the optic. This keeping the slide opened the length of the brass.

Wasn’t a chronic issue but happened enough Dave mentioned it and we saw it!
Click to expand...
It’s not the only way. It’s probably the best way, but until they make every red dot in configurations to fit any gun or they standardize the footprint, plates are gonna be a thing. Springfield ( in some cases) forces you to use a piece of crap optic unless you get an aftermarket plate. Holosun is doing a pretty good job of trying to keep up with market demands, but as an example, if you want a Holosun 507c on your VP9 you’re gonna need a plate.
 
So you guys have had good experiences with the Glock store? I was looking at some stuff on their website but I saw a lot of bad reviews online for them.
 
Marek71 said:
So you guys have had good experiences with the Glock store? I was looking at some stuff on their website but I saw a lot of bad reviews online for them.
Click to expand...
bad reviews in what way...??

shipping delays??

during covid, i was lucky to get my parts 3 weeks after i ordered them, due to them not having a full crew....or out of stock items..that was a given during covid.

but otherwise, i look up a part that i want, order it, then they ship per the time table, due to the backlog of orders.
 
Bassbob said:
It’s not the only way. It’s probably the best way, but until they make every red dot in configurations to fit any gun or they standardize the footprint, plates are gonna be a thing. Springfield ( in some cases) forces you to use a piece of crap optic unless you get an aftermarket plate. Holosun is doing a pretty good job of trying to keep up with market demands, but as an example, if you want a Holosun 507c on your VP9 you’re gonna need a plate.
Click to expand...
FN has probably the best way with the new 509 MRD LE. LAPD specs they can mount most all duty rated optics directly to the slide where Sig only a couple everything else has to have an internet. FN has had this for 3 ish years since LAPD adopted it in 2022

In many many Range Master, Spaulding, Hearns and just running classes myself every person that had issues with optics coming off were running them on plates or the plate became loose effecting their zero. Of the maybe one person with direct mounts that had an issue it was because they admitted they used no loctite or torque it to specs. IE Man read the owners manual!
 
ECS686 said:
FN has probably the best way with the new 509 MRD LE. LAPD specs they can mount most all duty rated optics directly to the slide where Sig only a couple everything else has to have an internet. FN has had this for 3 ish years since LAPD adopted it in 2022

In many many Range Master, Spaulding, Hearns and just running classes myself every person that had issues with optics coming off were running them on plates or the plate became loose effecting their zero. Of the maybe one person with direct mounts that had an issue it was because they admitted they used no loctite or torque it to specs. IE Man read the owners manual!
Click to expand...
The Eschelon will mount many different optics as well.
 
Bassbob said:
The Eschelon will mount many different optics as well.
Click to expand...
I get that but it as good as it might be hasn’t been through the tests the FN has. Just familiar with Gb as I knew an FN Engineer and he talked about their direct mount with duty grad RDS a few years ago. Then watching what FN did with the testing for LAPD was pretty impressive
 
ECS686 said:
I get that but it as good as it might be hasn’t been through the tests the FN has. Just familiar with Gb as I knew an FN Engineer and he talked about their direct mount with duty grad RDS a few years ago. Then watching what FN did with the testing for LAPD was pretty impressive
Click to expand...
I feel pretty happy with the VP9 OR models. They take my favorite optics, which are Holosuns, so I’m happy.

Frankly I need to lay off the handgun binge I’ve been on lately. Couple shotguns I need to focus on. I completely blame F’in @SimonRL. I’ve blown enough money to buy a room full of shotguns because of him. My wife keeps trying to talk me into a Dallas vacation so she can slap the shite out of him. 🤣
 
Bassbob said:
I feel pretty happy with the VP9 OR models. They take my favorite optics, which are Holosuns, so I’m happy.

Frankly I need to lay off the handgun binge I’ve been on lately. Couple shotguns I need to focus on. I completely blame F’in @SimonRL. I’ve blown enough money to buy a room full of shotguns because of him. My wife keeps trying to talk me into a Dallas vacation so she can slap the shite out of him. 🤣
Click to expand...
i suspect there are a few other wives that would like to join her on that trip................:unsure:
 
Bassbob said:
I’m guessing women all over the world are lined up to smack him.
Click to expand...
Bring ‘em on down. I’ve always had a way with the ladies.

1709305382750.gif
 
Bassbob said:
I feel pretty happy with the VP9 OR models. They take my favorite optics, which are Holosuns, so I’m happy.

Frankly I need to lay off the handgun binge I’ve been on lately. Couple shotguns I need to focus on. I completely blame F’in @SimonRL. I’ve blown enough money to buy a room full of shotguns because of him. My wife keeps trying to talk me into a Dallas vacation so she can slap the shite out of him. 🤣
Click to expand...
😰 good! Keep her going west, it gives be more time to find places to hide if she decides to come east. 😳🤫😷🤕😬😬
 
You must log in or register to reply here.
Back
Top