Search results

The pn is 10G13. The spring in the package is the stock spring from my Prodigy.

Yeah had no issues installing it. If there is something specific that you would like checked I can take it back apart to supply pictures and part numbers if needed.

FWIW i switched out to a 13lb WC recoil spring on my 5inch prodigy and it ran 100 rounds with no issue. Definitely a fun shooter for sure.

Good video!

So I had a similar issue with a polymer 80 I built so I did some ad hoc testing where I took the barrel and would drop a round into the chamber, give it a tap with my finger then see if the round would seat and if I could pull it out. Some rounds would get stuck hard enough that I would have to...

Nice. I had a similar incident like you are showing on your 5th picture where the gun looks like it almost went into battery. I noticed a gun of mine did that when I installed an after market barrel. I had to hone the chamber some, until then it was very ammo sensitive. Maybe the chamber is...

Woohoo just took way more elbow grease than expected.

Thanks SimonRL. I'll give it a another go tonight.

That was the 1st thing I noticed day when I want to the range. The recoil was very soft, granted it was just standard 115gr range ammo but it was way softer then the 9mm xdm and regular 1911 chambered in 45 that I brought with me. It was soft enough that I checked to make sure it cycled, which...

I'm not able to unscrew mine. Concerned I might break the allen key. Any tips?

Did you have an issue loosening the guide rod? I tried rotating it a 1/2 turn field strip it but it didn't rotate.