Best recommended gun cleaning kit???
- Thread starter Lamps3
- Start date
Old_Me
Emissary
no..just piece meal the so called kit..
buy like maybe a tool tote bag, with LOTS of pockets......
like maybe this
then go to places like walmart and gun stores, or online at like MidwayUSA, or amazon, to buy what you need...
you are going to need to replace items anyway when you run out, so a kit in of itself is a waste of money
the bag is lifetime
buy like maybe a tool tote bag, with LOTS of pockets......
like maybe this
then go to places like walmart and gun stores, or online at like MidwayUSA, or amazon, to buy what you need...
you are going to need to replace items anyway when you run out, so a kit in of itself is a waste of money
the bag is lifetime
Anchorite
Custom
This.
Every firearm has its own particular characteristics such that I don’t think there is any, “one size fits all” solution.
I use a bore snake for my shotguns and my AR.
Coated rod for my rifles. Jags, no brushes.
Plastic (I think it’s from Glock) cleaning rod for my pistols, and copper brushes. Cloth patches.
Revolvers are a whole ‘nother level of detail.
Next up, what’s your favorite gun lubricant!
I got a pile of lubricants and cleaners on the back wall of my garage work bench.
I have a tackle box full of brushes, patches, punches, Allen and hex keys.
Baggies full of screws.
I have organizers full of springs, parts, etc., to the point I label each bin to keep it straight.
Point being, old_me nailed it, that’s a great tote type to hold it all, but you’ll just keep building onto it.
I recommend a bore snake for any caliber needed, pistol, rifle, or shotgun.
Some people clean after every trip, some never.. and some, in between.
Bore snake is good for a few pulls through the barrel after a good range trip.
A nice bronze pushrod and handle kit that allows screw on lengths of rod, depending on the firearm, is a good idea.
My advice, get quality here. You can get Amazon Cheapo…but the fittings wear, get loose, etc.
Out of all the cleaning supplies and tools I have, quality bronze fitting and rods are where I went cheap twice…but not the 3rd time.
I have a tackle box full of brushes, patches, punches, Allen and hex keys.
Baggies full of screws.
I have organizers full of springs, parts, etc., to the point I label each bin to keep it straight.
Point being, old_me nailed it, that’s a great tote type to hold it all, but you’ll just keep building onto it.
I recommend a bore snake for any caliber needed, pistol, rifle, or shotgun.
Some people clean after every trip, some never.. and some, in between.
Bore snake is good for a few pulls through the barrel after a good range trip.
A nice bronze pushrod and handle kit that allows screw on lengths of rod, depending on the firearm, is a good idea.
My advice, get quality here. You can get Amazon Cheapo…but the fittings wear, get loose, etc.
Out of all the cleaning supplies and tools I have, quality bronze fitting and rods are where I went cheap twice…but not the 3rd time.
It doesn't matter what kit you buy. you'll always be adding "this and that" to it. If you start with a basic kit from Hoppe's or Birchwood Casey that contains a rod, jags/brushes for the calibers you shoot that will be fine. Then you'll start adding to it... endlessly adding to it. 
Also, i like boresnakes for quick cleaning jobs. get one for each caliber you shoot. they are nice to have.
Also, i like boresnakes for quick cleaning jobs. get one for each caliber you shoot. they are nice to have.
The Night Rider
Professional
Lo-Profile
Master Class
Just go to Walmart and buy the stuff you need initially. None of it is really that much different.
Add to it as needed.
I keep dedicated pistol and long gun rods, so I'm not piecing then together.
I have way too much stuff for mine, I probably have 8-10 different kinds of oils and 5-6 different types of cleaners. I really like foaming bore cleaners.
Bore snakes in 7-8 calibers and brushes and swabs in probably more.
Add to it as needed.
I keep dedicated pistol and long gun rods, so I'm not piecing then together.
I have way too much stuff for mine, I probably have 8-10 different kinds of oils and 5-6 different types of cleaners. I really like foaming bore cleaners.
Bore snakes in 7-8 calibers and brushes and swabs in probably more.
Top rack only.
Hertervillian
Operator
Individual components for me when it comes to a dedicated home cleaning kit. No jointed rods on the place, 3 or 4 different rods length and caliber. Jags patches and chemicals as needed.
For field use I’ve pretty much defaulted to the Bore Snake and a CLP product.
For field use I’ve pretty much defaulted to the Bore Snake and a CLP product.
LDB
Elite
Look at Dewey one piece rods and add whatever else you need. https://deweyrods.com
Biggfoot44
Custom
In the context of : Brand New , First Time Gun Owner , Starting from Zero .
Basic kit from Hoppe or equivalent [ Just price checked internet , pricres in $15 ‐ $30 range] , will get you a cleaning rod , brush , and couple of Tips and Jags , cheaper than individual pieces . Plus a cheasy little plastic box . Buy extra package of patches same time .
This will get newbie thru first couple of range trips . After that , add additional ( whatevers ) , to your preferences .
******************
More explicity - Don't rabbit hole over " super duper advanced kits " .
Anchorite
Custom
They make great stocking stuffers around the holidays. (wink)
Old_Me
Emissary
some time ago, i switched out my Hoppes metal cleaning rod, for a Hoppes carbon fiber one.
brass connector on it also.
not always an easy tool to find.
Anchorite
Custom
Didn’t know they had carbon fiber rod now, but finally they do!
I’ve been know to save my plastic chop sticks from a sushi restaurant to use as a push rod for cleaning patches. They are about 5-6” in length, so work well for the majority of my handguns.
Old_Me
Emissary
it was actually quite hard to find anywhere....i cannot recall where i finally got it.
i cannot recall the pricing.
maybe by now, they are more readily available.
i do believe one is made for rifles as well.
just that "extra edge" to prevent scratching the barrel bore.
