Dillon 550C and maybe other Dillons..??

[Old_Me]

i don't know where my posting went, i still cannot find it, so as best i can, a reposting of what i spoke about last week.

some of you that do not reload or own a DIllon, you may not be familiar with any of this, so it's a mere posting in show & tell.

in this picture, is a spring from my Dillon 550C....it operates the primer slide bar....

as you can see, the "loop" at the left broke off...the spring is quite strong, but at the same time, the coils are thin...on the Dillon facebook page, some have said they get "about" 7,000 rounds, before it breaks.....some say then got well over 10,000 rounds.

mine broke at just over 3,500 rds.

also too, i bought this NIB from the RSO who was getting rid of all his reloading room....and scooped it all up.

so i called Dillon, and this spring is $6.00 EACH...but i did not get one for free...must depend on who answers the phone..???...i had ordered 5 springs.

anyways, they arrived yesterday (8/13/25)


now on the Dillon facebook page an owner showed this picture..

and this is the "operating rod" for the Dillon, that pushed back that primer bar, in this picture, outlined.....

his operating rod broke as well, (different owner), and some claim a lifespan of 7K to 10K rnds..

i went "pro-active" and ordered up 2....

when this new replacement spring breaks, and i suspect it will, and when my original operating rod breaks, i will call Dillon and ask for "freebies"........

it should be "hassle free lifetime warranty" ..........but yet, does it depend on who answers the phone...???

 

[Shibadog]

I dunno. My Dillon Determinator electronic scale died after several years. I called and got a new one free but that was 8-9 years ago.

 

[Domar1291]

I thought dillion always stood behind there products with a hassle free warranty. Maybe they thought you were ordering spares ?

 

[Dillonfriend]

Old_Me,
Your broken spring is covered under warranty. We do charge a $4.99 shipping fee now on warranty parts, due to significant increases in shipping charges. Please email me directly, gary.kieft@dillonprecision.com and I will mail you a replacement spring for free, to replace the broken one. I will need your name and mailing address. I do apologize for the error.

 

[Old_Me]

Old_Me,
Your broken spring is covered under warranty. We do charge a $4.99 shipping fee now on warranty parts, due to significant increases in shipping charges. Please email me directly, gary.kieft@dillonprecision.com and I will mail you a replacement spring for free, to replace the broken one. I will need your name and mailing address. I do apologize for the error.

Thank you Gary...!!

email sent to you with my name, address, and also all the #'s on the sales slip

DO NOT be a stranger here.......we LOVE communications with companies..!!!

 

[powerboatr]

i was going to say
my square deal B broke a few things and always had stuff sent out
hint.. try to break numerous items so only one shipping charge
seriously the few items that failed was an easy OK
i was surprised you had a bad experience at first

 

[Old_Me]

well, i got a phone call from "Cat" the sales manager at Dillon...

she left a message earlier, and i just spoke to her....

that guy from Dillon that posted here, is "Gary, Dillon's human manual"........lol...lol

she reiterated that they are shipping out a new spring

as for the control rod that pushes back the primer bar, she mentioned that only going "half way" may be the cause of that rod breaking.

so be sure to go the full up or down stroke, i would think be a better idea.

and as mentioned due to shipping costs, we do have to at least pay for shipping charges now on warranty items.

very hot and muggy here, but "cool" responsiveness from Gary and Cat...!!

 

[Old_Me]

one very interesting thing with my conversation with "Cat" at Dillon....

read Gary's recent email from me, minutes ago.
--------------------------------------------------------------------------------------------

"Howdy

A replacement spring is invoiced, and should ship today. The Sales Manager pulled the call, and it wasn’t clear that you needed a replacement spring under warranty.

You said you have a propensity to break them, and you wanted to order five. In the future, if you have a broken or damaged part and want extras, just say you need one

Warranty part and want to order X number of spares. We are happy to take care of you.


my response to Gary was this...

Actually Gary, I questioned "Cat" on what I had said...this is my first ever Dillon, and the very first time the spring broke..I only have 3,500 rounds thus far thru it.

I think what I might have said was I read that they tend to break at XXXX number of rounds, and I either got that from the DIllon facebook pages, one for the 550 and the other is Dillon Precision Reloaders The Official Blue Group.....or from the website..."The High Road, reloading thread.....

Honestly, I cannot recall where, but several guys chimed in to say that spring has a tendency to break

I simply could not have that tendency to break that spring, with only 3,500 rounds, and this one time, it broke..

I was very confused when she said that's what I had said...

Could you please share this email with her..??

Thanks again, and I did not know it was you, "the Dillon human repair manual"....lol

 

[Old_Me]

still at the very least, Gary (Dillon's human manual) or someone is reading websites.....

that's good, they get to see, hear and read about their products.

 

[Dillonfriend]

We have found that customers often post questions on a variety of forums during our off-business hours. We feel it is good business practice to make sure their needs are met correctly, with information, advice, or actions. We are your friend at the factory. Yes, I am AKA "the Human Manual" on many of our videos. Work at the same place 41 years and you can pack your brain.

 

[Pitdogg2]

More than 10yrs ago Dillon was charging for shipping it's nothing new. I'll gladly pay shipping for a warrantied part, no problem. Shipping now as compared to then as astronomically more expensive.