"Snake Eye" screws

[TeufelgundenArmory]

Good afternoon, y'all!

I was wondering if anyone could give a little insight on the best screwdriver sets that include "Snake Eye" or 2H bits. I need a set for something I'm working on and I think google hates me because I'm not being able to find sets containing them, only information on the type of screw head. Thanks in advance!

 

[TEXASforLIFE]

since they're meant to be tamper proof, finding them can be difficult. i thought there are revolvers that use these screws? what are you needing it for?

 

[Certified Silly Goose]

https://www.amazon.com/iFixit-IF145-299-4-Driver-Bit-64pc/dp/B0189YWOIO

Looks like this kit has what you need. I own this kit and it's built solid. Not cheap, but worth every penny.

 

[TEXASforLIFE]

https://www.amazon.com/iFixit-IF145-299-4-Driver-Bit-64pc/dp/B0189YWOIO

that doesn't contain the correct bit/driver he wants

 

[Certified Silly Goose]

This set has 5 bits, but I can't speak to the quality of it. A lot cheaper, though.

Amazon.com

 

[Certified Silly Goose]

that doesn't contain the correct bit/driver he wants

My bad... Is there a picture of the fastener that I can reference?

 

[Certified Silly Goose]

If you're talking about these, then I did in fact give him the right kit. Look at the bits I circled.

 

[Certified Silly Goose]

If you don't care about destroying the fastener, then you can always cut a slot into it with a dremel and use a flathead.

 

[TEXASforLIFE]

My bad... Is there a picture of the fastener that I can reference?

i couldn't tell from the pic, my bad. those look square instead of round

 

[Belt Fed]

My bad

my bad

Both of you bad, very bad.

 

[TEXASforLIFE]

btw, i've use needle nosed plyers to remove those types of screws before and 2 watch type screwdrivers also.....no damage to the screws. you could insert 2 just small enough phillips type into the holes and use a flat blade to help unscrew.

 

[Certified Silly Goose]

btw, i've use needle nosed plyers to remove those types of screws before and 2 watch type screwdrivers also.....no damage to the screws. you could insert 2 just small enough phillips type into the holes and use a flat blade to help unscrew.

Depends how big the fastener is. If they're too small, you can also use 2 brad nails with a slot head between them for torque. But if he wants an actual driver for it, he'll need one of the kits I posted above.

 

[Certified Silly Goose]

You can also grind a notch in a flat head bit and make your own

 

[SL66]

Try Klein tools.

 

[Sharks79]

I have the Ifixit set. It’s nice