What are you doing right now??

[Old_Me]

I got some are like 30 years overdue.

i really DO believe you, which frankly one of a small few of reasons, i emptied out my stable..

keeping track of range time was a bit of a chore.

another thing too, what a former RSO told me, that he,

"would rather have 1 or 2 guns and shoot them incredibly well, rather than a bunch of guns and shoot them mediocrity....(Irregular performance)".

now i still have "a bunch of guns", just not like the 50 or so i once had.

i think i'm down to 49 now......

seriously

only 19 right now

 

[Dobbinsky]

Just returned from Tractor Supply. Picked up a 50lb bag of gamefish food for my trout, bluegill, channel cats, and bass. When the water gets into the mid-50s, the trout will get hungry.

 

[NMEDGE]

That POF PSG22 i just bought new off gunbroker sold as new, POF just told me it is 5 years old. be careful buying stuff there. that was it for me. I noticed it did have kind of a low serial number. they said they would still warranty it. a couple days ago i ordered a couple recoil springs and some other stuff. the spring in it feels really weak. i had no idea it was that old. now i'm thinkin the thing might have been stored several years with the bolt locked back. we will see when i get the new springs. will save me from packing it up and sending it off

Remember if you can't fix it i'll take it off your hands

 

[NMEDGE]

Just purchased some 5.11 shorts to show off my pretty legs this summer.

 

[Belt Fed]

Just purchased some 5.11 shorts to show off my pretty legs this summer.

Pics?

 

[OldGrunt]

Just purchased some 5.11 shorts to show off my pretty legs this summer.

People will think you're some kind of special forces killer type!

 

[Belt Fed]

People will think you're some kind of special forces killer type!

I bet he gots them legs that look like two well ropes they tied knots in to make knees.

 

[Belt Fed]

I'm sho bout to start that man or woman thread

 

[Annihilator]

Just purchased some 5.11 shorts to show off my pretty legs this summer.

 

[TEXASforLIFE]

Installing the takedown on the future 357sig (fcu and mag release already installed) . Below is the x-10 with the icarus gray frame, extended mag release and future 3-port barrel (just need to do the fitting)

 

[TEXASforLIFE]

The 4 pmags cane in (3.715") for thr 264wm and the 2 olight 2k lumins.


Previous pic is the black frame icarus p320. IIRC the slides should be here by Saturday and barrel should be close to the same time?

 

[TEXASforLIFE]

What do you guys think i should do with this slide (9×19luger)? Brownells will accept the return, but I might just do a build? Possibly do a steel (not aluminum) frame for this 3.9".

 

[Belt Fed]

What do you guys think i should do with this slide (9×19luger)? Brownells will accept the return, but I might just do a build? Possibly do a steel (not aluminum) frame for this 3.9".

Do you need my address?

 

[NMEDGE]

Pics?

Nope! I don't want you dreaming about me at night!

 

[TEXASforLIFE]

Do you need my address?

i might just drop it off instead of shipping it! i'll give you the cost after finishing the build and let you decide

 

[powerboatr]

got my gun log book out, to check on what guns are due for some choot'n

frankly a few are, and i even made the mistake that i took the colt comp 1911, and DID NOT jot it down, so i just put in march/26.

i hate when i forget specifics.

anyway, at least 1 gun at a time, and tomorrow, the Beretta 92 FS, 1 box reloads, 1 box factory

going to the public range, usually always on thursdays.

also getting about time to start reloading again....the very cold basement is getting warmer now to start up the Dillon.

gotta do at least 1,500 each, 9mm and 45 ACP.

i can beat a log book
when ever the safe is opened they all know its TIME to goooo

 

[TEXASforLIFE]

here's the frame in question for the build, but it's a full sized frame instead of the compact. i most likely will use a tungsten guiderod and add a comp to finish out the slide length.

 

[TEXASforLIFE]

for you compact or just sig owners with knowledge about guide rod compatibilities i'm looking for either tungsten or steel (not hollowed out) that fits the 3.9" slides/barrels? much info points me towards the m18 gr's, but idk?

 

[rcurtner]

got my gun log book out, to check on what guns are due for some choot'n

frankly a few are, and i even made the mistake that i took the colt comp 1911, and DID NOT jot it down, so i just put in march/26.

i hate when i forget specifics.

anyway, at least 1 gun at a time, and tomorrow, the Beretta 92 FS, 1 box reloads, 1 box factory

going to the public range, usually always on thursdays.

also getting about time to start reloading again....the very cold basement is getting warmer now to start up the Dillon.

gotta do at least 1,500 each, 9mm and 45 ACP.

Need to fire up my Dillon been way too long need to get off my lazy butt.

 

[TEXASforLIFE]

Need to fire up my Dillon been way too long need to get off my lazy butt.

mine has been idling for 3-4 years since i last reloaded