What are you doing right now??
- Thread starter Jester560
- Start date
powerboatr
Hellcat
i feel good now, i got one of them handles on my barrel cover as well...
powerboatr
Hellcat
since yall asked
spent about 4 hrs troubleshooting the fridge in the bus
samsung 19 ft counter top edition
the compressor kept short cycling ,, on for 10 to 20 second then off for 10 to 15 minutes
ordered a new start cap thing, to be here tomorrow
hard part is i have to move fridge out of its mount in the wall about a 12 inches to get my fat arm in to the relay thingy.
had to build a block to hold fridge as it moves out..
also sourcing new fridge if this reveals compressor is fried... freaking crap is getting old . fridge is a 2013 year.
if i have to replace the whole fridge.... thats an adventure i need a case without doors to be able to fit through a 24.25 inch door opening OR build a jig to slide the slide out onto and then come in via the 6x6 foot hole.. that means a week at the rv fixing place
samsung stopped making the unit so the search is on in case for a backup to field strip, get into the bus then re assemble and install
spent about 4 hrs troubleshooting the fridge in the bus
samsung 19 ft counter top edition
the compressor kept short cycling ,, on for 10 to 20 second then off for 10 to 15 minutes
ordered a new start cap thing, to be here tomorrow
hard part is i have to move fridge out of its mount in the wall about a 12 inches to get my fat arm in to the relay thingy.
had to build a block to hold fridge as it moves out..
also sourcing new fridge if this reveals compressor is fried... freaking crap is getting old . fridge is a 2013 year.
if i have to replace the whole fridge.... thats an adventure i need a case without doors to be able to fit through a 24.25 inch door opening OR build a jig to slide the slide out onto and then come in via the 6x6 foot hole.. that means a week at the rv fixing place
samsung stopped making the unit so the search is on in case for a backup to field strip, get into the bus then re assemble and install
Last edited:
BassCliff
Ronin
Hi,
Just back from the range, breaking in my new XDM Elite 10mm 4.5. I put only 50 rounds through it today with mediocre results. It should get better as we both loosen up.
I'm gonna finish my snack and then see about putting up a range report. Blessings to all.
Thank you for your indulgence,
BassCliff
Just back from the range, breaking in my new XDM Elite 10mm 4.5. I put only 50 rounds through it today with mediocre results. It should get better as we both loosen up.
I'm gonna finish my snack and then see about putting up a range report. Blessings to all. Thank you for your indulgence,
BassCliff
Belt Fed
Emissary
You secret agent fellers sure shoot a lot.Hi,
Just back from the range, breaking in my new XDM Elite 10mm 4.5. I put only 50 rounds through it today with mediocre results. It should get better as we both loosen up.
Thank you for your indulgence,
BassCliff
BassCliff
Ronin
Hey!
It's been three weeks since I've gone to the range. I was so rusty I needed WD-40.
Thank you for your indulgence,
BassCliff
It's been three weeks since I've gone to the range. I was so rusty I needed WD-40.
Thank you for your indulgence,
BassCliff
Old_Me
Emissary
KillerFord1977
Emissary
SimonRL
Ronin
Annihilator
Hellion
Watching the Beekeeper with Jason Statham good movie
KillerFord1977
Emissary
KillerFord1977
Emissary
Old school.
Get the paper clips and tape !
Retired Bum
Professional
Just finished the classic, My Cousin Vinny
KillerFord1977
Emissary
Im prob 1500+ rounds in on 4 pistols and have not cleaned a one.. i clean then every 60 days.. always have for 35 yrs.. guns are made to go the distance . I could go longer, but dont like to brush up against the clothing accidentally and smudge.
CCW gets an external wipe down before putting away. Only exception
powerboatr
Hellcat
watching american hobo on u tube
Retired Bum
Professional
Research for the next career?