testtest

What have you bought firearms related in the last 48 hours?

BET7 said:
I don’t have the Romeo X enclosed model on my Fuse or AXG Legion (but I do have the Enclosed Romeo X Pro on my M18 & P226 Reserve). The X compact I have, does have a rear sight that sits in front of the guns rear sight. The compact X model I have is linked below for reference.

www.sigsauer.com

ROMEO-X COMPACT

Designed for the P365 and all pistols using the Shield RMSc footprint. This military-grade optic features a 7075 aluminum housing, side-loading CR1632 battery for easy replacement without re-zeroing, and MOTAC™ motion activation for 20,000 hours of runtime. Low deck height allows for absolute...
www.sigsauer.com www.sigsauer.com
Click to expand...
I too have the pro model on my P226, really like it. Sig also has a relatively new enclosed optic for the P-365 Fuse. The optic mount screws go through the bottom of the slide. Off hand can't remember the model number.
 
FMJ said:
I bought a sig m11-A1 9mm about 9 years ago and right out of the box it wouldn't shoot anything except RN ammo no HP ammo at all. Tryed all the mags and no difference.Feed ramp was all full of pits, ruff as hell. Called sig they sent me a label to send it back. Got a email from them and they said they shot it 60 times and it was fine.So I called them up and talked to some guy who was in charge of testing and asked him if he tested all the clips. He told me that I only sent 1. I told him bullchit i sent all 3 that i got with the gun.Got a email next day they found the other 2 clips and gun was on it's way back.Went to the range and SAme thing JAM JAM JAM.So i got out the dremel and some super fine compound and fixed it myself.I thought for sure they would put in a new barrel. A guy here at the range had a 320 and dropped it by accident in the dirt and it went OFF TWICE. Good thing he was down range at the targets. JMHO
Click to expand...
Everyone's heard (or experienced) a Sig horror story. I honestly would like to support them, but I'd sooner buy an FN or S&W. And the S&W will cost less, too!
 
FMJ said:
Annihilator I'll double check on the story about the 320 and if i'm wrong i'll own up to it.What good is the sig warranty if they didn't fix my gun? jmho. It's had maybe 1000 rnds thru it since i cleaned up the ramp and now she ain't picky on any ammo even the white box winchester hp that wouldn't chamber before.
Click to expand...
I had to do something similar to a used but excellent condition Taurus PT101AF, essentially identical to the Beretta 96. With few exceptions, it's practically near to impossible to find .40 range ammo that's NOT flat-nose. Jam, jam, jam! so I whipped out my Dremel and found a grinding cylinder that looked dang close to 10mm, and had at the feed ramp. Once I had it the way I wanted it (took a while because I didn't dare take too much - no mulligans), I went at it with the polishing compound and had at it like a madman. Made the ramp so slick, so perfect in every way, you'd think it came from the factory that way. After that, it would eat ANY ammo, especially the FN FMJ.

My Taurus PT101AF .40 b.jpg
 
Last edited:
rcurtner said:
Just Picked up my P-365 Fuse today. Initially was told 6-8 days for delivery from Impact Guns, ordered it 11/21 got it in 3 days. Did not like the sights my great FFL sold me a suppressor height night set for 50 bucks that listed for 129 bucks. Their gunsmith replaced them in about 25 minutes no charge. No transfer fee or state taxesView attachment 74209
Click to expand...
Great looking gun! Good luck with it.
 
FMJ said:
Annihilator I'll double check on the story about the 320 and if i'm wrong i'll own up to it.What good is the sig warranty if they didn't fix my gun? jmho. It's had maybe 1000 rnds thru it since i cleaned up the ramp and now she ain't picky on any ammo even the white box winchester hp that wouldn't chamber before.
Click to expand...
No, I totally understand why you did the work, I probably would have done the same myself, I had one of the new S&W 66’s, went out of time after first cylinder full, I took it to my gunsmith who used to be a warranty repair station for S&W and paid him $40.00 to fix it, so I voided its warranty also, as for the 320, if it did go off when dropped, I highly doubt it went off twice, what stopped it then from emptying the mag, that’s why I said unless I witnessed it, I would be very skeptical, just my thoughts
 
FMJ said:
Annihilator I'll double check on the story about the 320 and if i'm wrong i'll own up to it.What good is the sig warranty if they didn't fix my gun? jmho. It's had maybe 1000 rnds thru it since i cleaned up the ramp and now she ain't picky on any ammo even the white box winchester hp that wouldn't chamber before.
Click to expand...
I also had a new S&W 629 that had the barrel canted to the right, sent it back, when it came the barrel was now canted left, sent it back again, received it and just traded it off, so I know what you mean.

Reply
 
You must log in or register to reply here.
Back
Top