testtest

New profile posts

How’s the weather ?? It’s raining pretty good in AL
D
Denny Giacobe
Hi People I'm new here and new to gun owing, But I have been photographing fire arms for the past 6 years for a few gun magazines 2 years ago I did the cover for Gun World for October, I now am on staff with Athlon Outdoors and have a 3 page spread in August Tactical Life Magazine.
Respectfully
Denny G
D
Denny Giacobe
How do I dost pictures?
Has anyone else been having problems with the Springfield Saint Victor 300 Blackout jamming? I just purchased this firearm brand new and immediately I began having these issues my first time shooting it.
BET7
BET7
Well Mr.Brooklyn, it sounds like it may be tuning the gas block as a potential fix for your issue, but before doing that, depending on what 300 BO ammo you're using.
BET7
BET7
Try what Keystone19250 suggests by trying supersonic heavy loads (vs 300BO SubSonic) and see what you experience with that. It always easier to try different ammo first than tune if issues, or going to sub-sonic rounds.
BET7
BET7
If you run a suppressor, then tuning the Gas Block may be necessary. Let us know in the forum your progress, as I'm interested as having the same Saint Victor platform. Good luck.
Does anyone have the Trijicon Acog 3.5x35.. made for the 308. If so, how do you like it, I am looking to get one soon.
New guy here, I have been a lurking for a while. Not new to firearms, but not a great source of information but a pretty good reader. Although I have a few different types and calibers, I have been an admirer of the 1911 for most of my life. Newest purchase Springfield 1911 Ronin 9mm.
G
gordon
Wanted a Ronin, but Massachusetts doesn't agree .
cmduck
cmduck
I liked the Ronin the first time I saw the picture from SA. With the recent outbreak, I think I may have found one of the last ones in stock.
I thank u all for your time & knowledge on educating me about the tritanium sight fir the hellcat
paul
Just fired my new XDM Elite 9mm today, the cap on the threaded barrel comes loose. I watched videos and didn’t see that it should be removed prior to firing. Should it?
T
ToddP
My XDm in 45 acp also did the same thing. I would normally shoot a mag through it then tighten it back down. It needs an o ring which should be available in any hardware store then slide it over the threads then put your end cap on and this should take care of this problem.
hello guys wife just bought wolf 9mm 95grain rounds 1st one in chamber jammed and slide wouldnt close had to force open and pry round out casing looks to be a hair shorter than 114 grain rounds any help would be welcome new to 9mm world
  • Like
Reactions: BET7
BET7
BET7
What type of 9mm firearm are you shooting with? 95gr is usually 380 ammo, but I see Wolf sells 95gr 9mm Makarov ammo (Not meant for a 9mm Luger firearm If that’s what you have) 9mm Luger is usually in 115gr, 124gr & 147gr. Unless you’re shooting an old Soviet type Makarov pistol, I would not be firing 95gr from a 9mm Luger if that’s what you own.
BET7
BET7
Most common 9mm firearms sold in gun shops fire the 9mm Luger round (9x19 Parabellum). Firing a 9mm Makarov round (9x18mm), in one of these could be dangerous. you should post your question to the entire forum vs a profile post. There’s more knowledge people than I that could give you more Information
I’m trying to decide between the Ronin Operator or the Target in 45acp, seems there the same with the only difference is the adjustable rear sights on the Target model. I sure like the looks of the Ronin but they are scarce
G
gordon
wish Ronin was Massachusetts approved ..I would buy one in a heartbeat
J
Jrtopp
Got the Ronin Gordon, sweet shooter, only issue I’m having is, I've got big hands, so with my support thumb resting on the safety the slide is nicking The top of my thumb putting little slices as it cycles.
Does anyone know when the EVAC is scheduled to be shipped? I’ve had a deposit on one for a couple of months. I originally heard they would be available spring 2020.
OkiePewPew
OkiePewPew
I noticed the PDW has started to show up in a few places. Not sure if they’re releasing them at the same time or staggering them. Covid has messed everything up.
  • Like
Reactions: Graham
TITLE TWO CLASS THREE ARMORER/OWNER (HANSEN BROS ARMS, INC.) MFG. VINTAGE NATIONAL MATCH U.S.RIFLE M14NM/M1ANM. VINTAGE U.S.G.I. SNIPER RIFLES M1C. M1D. M1C1952. M21. M25. M14EMR. M39.
ROBERT W HANSEN SR.
ROBERT W HANSEN SR.
Back order's are running at six months too one year because of my present disability and health issues. Thank's. R.W. HANSEN SR.🧿💣🔫🎯;)
Is there a better manual of instruction for a SA 1911 Range Officer Target than what is supplied with the firearm ?
G
gordon
Following this as I purchased SA 1911 RO Target 3 weeks ago .
could the gun store have sold the gun I ordered. was told I would get it in 1 or 2 weeks. paid in full and there are lines aroud the block outside gunstore
OkiePewPew
OkiePewPew
It’s a possibility but Springfield doesn’t control how the stores operate. I do know that distributors have been bare shelved for a while now as a 2nd wave of gun buying has happened (not sure the first one ever ended). There’s also a large shipping delay with many carriers because of “civil unrest”. Wish I had a better answer for you.
S.A WONT GIVE ME 2 MAG AND SCOPE MOUNT. I odered m1a in april and was told I would get it in 1-2 weeks. still didnt get it. Asked about getting the 2 mag and scope mount and they said no. I said I havent got my gun from them and wanted the offer and they said no. I asked when I will get the gun and they said wait in line with everyone else. I said how I had called many time and cant get thru and they dont care.
J
jimmy M1A
I bet I could get intouch with CZ and they would pick up the phone. I was born in NY and try to buy American,, this is why people dont care about who makes stuff. They buy from companies that treat people well
Top