testtest

Holosun SCS w/ K footprint.

  • Thread starter Thread starter Bassbob
  • Start date Start date
B

Bassbob

Guest
This is supposedly going to show up at shot show 24. K footprint is a modified RMSc. So 365 guys will still need a plate or have to file down two lugs.

I was on the verge of ordering a 507K for a Masada Slim, but I prefer the SCS so I think I’ll hold off until this comes out.
 
Bassbob said:
This is supposedly going to show up at shot show 24. K footprint is a modified RMSc. So 365 guys will still need a plate or have to file down two lugs.

I was on the verge of ordering a 507K for a Masada Slim, but I prefer the SCS so I think I’ll hold off until this comes out.
Click to expand...
The RMSc footprint is way I need for the s&w 5.7. Are you wanting an enclosed optic?
 
Bassbob said:
This is supposedly going to show up at shot show 24. K footprint is a modified RMSc. So 365 guys will still need a plate or have to file down two lugs.
Click to expand...

Assuming it's the same 'modified RMSc' footprint as the existing K models, there is no adapter plate needed for the P365. I recently put a 407k on my P365XL and it was a direct mount.

Scroll down to "Directly Compatible Hanguns:"

www.opticsplanet.com

The Holosun K Red Dot Footprint

Learn all about the Holosun K Series footprint design used on the 407K, 507K, EPS, and EPS Carry, as well as what handguns it is compatible with.
www.opticsplanet.com www.opticsplanet.com

thegunzone.com

How to install Holosun 407k on Sig P365XL? | [October Updated]

How to Install a Holosun 407k on a Sig P365XL: A Comprehensive Guide Installing a Holosun 407k red dot sight on your Sig P365XL is a popular upgrade that enhances accuracy and target acquisition speed. The process involves removing the factory slide plate, mounting the Holosun optic, and...
thegunzone.com thegunzone.com
 
Hammer67 said:
Assuming it's the same 'modified RMSc' footprint as the existing K models, there is no adapter plate needed for the P365. I recently put a 407k on my P365XL and it was a direct mount.

Scroll down to "Directly Compatible Hanguns:"

www.opticsplanet.com

The Holosun K Red Dot Footprint

Learn all about the Holosun K Series footprint design used on the 407K, 507K, EPS, and EPS Carry, as well as what handguns it is compatible with.
www.opticsplanet.com www.opticsplanet.com

thegunzone.com

How to install Holosun 407k on Sig P365XL? | [October Updated]

How to Install a Holosun 407k on a Sig P365XL: A Comprehensive Guide Installing a Holosun 407k red dot sight on your Sig P365XL is a popular upgrade that enhances accuracy and target acquisition speed. The process involves removing the factory slide plate, mounting the Holosun optic, and...
thegunzone.com thegunzone.com
Click to expand...
So it only has 2 lugs ?

The Holosun guy told everyone they would still need a plate or to file two lugs off their 365.
 
Far be it for me to contradict a Holosun rep, but here is a 407k mounted on a P365XL with the factory optic cut - no adapter plate, no lug filing required. Flush fit and secure as can be.

IMG_6792.jpg


I'm not going to remove the optic, but as I recall, yes, there are only two lugs.

The two articles I linked confirm the same. Not sure if Sig changed their footprint at some point (pictured slide above was purchased in 05/22), but the 1st article I linked is from over a year ago, and the 2nd article is from last month, so this has at least been the case for over a year and a half.
 
I literally just bought a 507k x2. And installed it on my P365 without any plates. I created this account to respond here. I'm a member on so many forums I get lost where I have accounts any longer haha... But decided to pitch in some info on said matter. I will post some pics
 
Winxp_man said:
I literally just bought a 507k x2. And installed it on my P365 without any plates. I created this account to respond here. I'm a member on so many forums I get lost where I have accounts any longer haha... But decided to pitch in some info on said matter. I will post some pics
Click to expand...

I don't doubt it. Either I misunderstood what "Holosun Josh" was saying or he misunderstood the question he was responding to.

In any case it's about time Holosun make an SCS that has the modified RMSc, aka, "K", footprint.
 
You must log in or register to reply here.
Back
Top