testtest

Glock 17 Gen 6

Bullseye1776

Operator
Quick back story - spent some time last weekend with a trainer diagnosing and fixing my issues hitting low left. learned what I need to correct and how to correct it. Trainer also spent some time showing me how triggers feel. That led us to compare my Glocks trigger to the triggers in my P365, P320 and Canik TTI. I do not like the stock Glock trigger.

So looking for suggestions on replacing the trigger. Looking for an option geared for EDC and home defense, not competition.

Thanks in advance!
 
I would try basic stuff first before I made significant changes.

Since the OP doesn't indicate what you dislike about the trigger, I'm going to figure you want to lighten the pull a bit and smooth it out.

In my experience, Glock OEM triggers are inconsistent with regard to break. Some break pretty clean while others mush through it (more common). Change here will require changing parts.

Start with a couple of basic things. Strip the slide and clean the internal channels. Even if the gun is new, there's always a possibility of some residue inside. Spotless and dry are what you are looking for.

While you have it apart, check to see if the channel liner is rough. You can move the striker assembly in it and determine how it feels. It should move smoothly and freely. I suspect Gen 6 still has a replaceable liner, but don't have firsthand knowledge.

On the frame, polish the trigger bar where it contacts the connector and the side that runs along the frame. Polish the top of the nub that contacts the safety plunger. Polish, don't remove material!

Install a minus connector that has been polished. Use a bit of polishing material to smooth the frame side next to trigger bar. Polish the safety plunger face that contacts the trigger bar and the sides of the plunger.

Basic parts you can swap that may help smooth things out:
1) Trigger connector
2) Reduced power safety plunger spring
3) Channel liner (stainless v. plastic)

Clean everything well and reassemble it. Glock says to put a drop of oil where the trigger bar and connector interface. I generally put a drop on before I put things back together.

These are things I am comfortable doing on a carry gun. The trigger isn't going to be on par with an OEM Canik, even if you go the GPT route. You can get them better, but a good Glock trigger comes from the aftermarket.
 
Quick back story - spent some time last weekend with a trainer diagnosing and fixing my issues hitting low left. learned what I need to correct and how to correct it. Trainer also spent some time showing me how triggers feel. That led us to compare my Glocks trigger to the triggers in my P365, P320 and Canik TTI. I do not like the stock Glock trigger.

So looking for suggestions on replacing the trigger. Looking for an option geared for EDC and home defense, not competition.

Thanks in advance!
first..how many rounds have been shot..??

second, you do you, but i'll NOT change things on ANY carry gun...i keep them stock

finally if a very low round count....

shoot it some more.

it may just need more rounds to "loosen" things up a bit.
 
about 400+ rounds so far. Also spending a lot more time dry firing. I'll give it some time then maybe try the trigger job mentioned above first.

Out of curiosity, why the aversion to making changes to a carry gun? is there a chance of reducing reliability or the safety of a firearm if you change out something like the trigger?
 
about 400+ rounds so far. Also spending a lot more time dry firing. I'll give it some time then maybe try the trigger job mentioned above first.

Out of curiosity, why the aversion to making changes to a carry gun? is there a chance of reducing reliability or the safety of a firearm if you change out something like the trigger?

The argument against changing things on a carry gun generally center around modifications that a prosecutor will try to suggest made the gun extra dangerous.

Every aftermarket Glock trigger I have seen retains the blade safety; I don't know that would be a concern in my world. Keeping the internals OEM (striker/trigger) should maintain reliability.

The Glock system is very simple. Bypassing or eliminating the internal safety isn't something you can accidentally do.

My understanding is that within that system tolerance stacking can lead to less than optimal performance from a shooter's perspective but remain quite acceptable from the manufacturer's perspective. I would think it possible to take parts from a bin and minimize those tolerances if one chose to do so. It's easier to toss the OEM stuff and install quality aftermarket parts that have tighter manufacturing controls.
 
My honest opinion, I would sell the Glock and buy any of the others on the market that are just as dependable and already come with a good trigger.
I have thousands of rounds and hundreds of hours of training - actual training, not just static range time, and Glock triggers just suck. It's like you're squeezing a bag of mashed potatoes.
 
about 400+ rounds so far. Also spending a lot more time dry firing. I'll give it some time then maybe try the trigger job mentioned above first.

Out of curiosity, why the aversion to making changes to a carry gun? is there a chance of reducing reliability or the safety of a firearm if you change out something like the trigger?
many people gripe about Glocks, for one thing or another.

just like people hate Microsoft, people gotta hate on something,that just plain works.

i have had Glocks since i started back in around Feb of 2020.

i have NO issues with grip angle, trigger, what ever else.

i must sound like a "Fanboi" of Glocks.......I ain't..i am a "fanboi" of 1911's


when it comes to a ccw gun...OEM for me.

if you have to change out parts, do so at your own risk...

way too many times, people have complained about changing things out and the gun either jams, or just plain stops working..

too many people encourage changing parts

i just DON'T..when it comes to a ccw gun.........

all others...???

have at it.
 
You sound like a fan boy. When Glockists refer to valid criticism as "hate" that's a giveaway.

I don't know of another brand of pistol that has an almost cult-like group that protects it.

It's OK to like Glocks. Just understand that not everyone shares your enthusiasm. Not every Glock runs flawlessly from the jump; ammo sensitivity can be an issue. It may be anecdotal, but go watch some of the YouTube reviews Honest Outlaw did of the V series.

Yes, our stable has ten of them, so I have a little experience with them. One or two may make the cut if I were choosing the best ten pistols we own, but only because I shoot my G17L and G42 fairly well.
 
You sound like a fan boy. When Glockists refer to valid criticism as "hate" that's a giveaway.
i don't think so..

i believe the "hate" stems from others continually bashing a brand,,,,ANY brand of ANY THING, guns, cars, trucks, etc, etc.

many people are gullible and sway towards "public opinion", rather than actually owning a product for any length of time, and learning that product.
 
i don't think so..

i believe the "hate" stems from others continually bashing a brand,,,,ANY brand of ANY THING, guns, cars, trucks, etc, etc.

many people are gullible and sway towards "public opinion", rather than actually owning a product for any length of time, and learning that product.

Didn't say you are a fanboy, I said your comments sound like the fanboys. I find the reaction of them interesting when people offer criticism based on their observations.

When the response is "you're a hater" rather than a reasoned defense, it generally indicates that honest debate isn't going to be an option. This applies to issues other than firearms, as well, especially political ones.

Part of the reason people are overly vocal in their criticism of Glock is to gig the loyalists. It's kind of fun to watch their collective heads explode when you tell them why something on a Glock isn't "perfection".
 
Didn't say you are a fanboy, I said your comments sound like the fanboys. I find the reaction of them interesting when people offer criticism based on their observations.

When the response is "you're a hater" rather than a reasoned defense, it generally indicates that honest debate isn't going to be an option. This applies to issues other than firearms, as well, especially political ones.

Part of the reason people are overly vocal in their criticism of Glock is to gig the loyalists. It's kind of fun to watch their collective heads explode when you tell them why something on a Glock isn't "perfection".
ok, i misread what you said....my bad,
 
Back
Top