Kuna Malfunction
- Thread starter ezombine
- Start date
@500ish rounds through mine, mostly surprised, several types/brands of ammo, zero issues.
About to put another few hundred down range tonight to test what I like best for subsonic.
When I had an early release prodigy, jam o matic and issues. Sent it in, if I recall, it was back in my hands in under 10 days and a perfect runner since, even in the posession of someone else (sold to friend).
Surprised it’s taken this long, to be honest, but it’ll be right when you get it back.
Only problem I’ve heard of is dirty mags causing malfunctions.
I just recently cleaned mine….because I detail stripped and cleaned the whole thing, total break down of the upper, piece by piece. Even though the mags were carboned up a bit, expected running with a can, zero malfunctions.
About to put another few hundred down range tonight to test what I like best for subsonic.
When I had an early release prodigy, jam o matic and issues. Sent it in, if I recall, it was back in my hands in under 10 days and a perfect runner since, even in the posession of someone else (sold to friend).
Surprised it’s taken this long, to be honest, but it’ll be right when you get it back.
Only problem I’ve heard of is dirty mags causing malfunctions.
I just recently cleaned mine….because I detail stripped and cleaned the whole thing, total break down of the upper, piece by piece. Even though the mags were carboned up a bit, expected running with a can, zero malfunctions.
You got lucky..
my Prodigy was recut chamber, fit barrel, tune extractor, polish feed ramp, and a few other things.
I wasn’t about to tinker with a brand new pistol with obvious flaws… and they fixed it properly and quickly.
uspatriot1960
Professional
I’ve only got a couple hundred rounds through mine, but it’s been flawless so far. Shot a few 115grain Blazers through it as well as Remington 147 grain FMJ subs and Winchester 147 grain hollow points. Everything cycled as they should. Hope you get yours back soon!
Sharks79
Custom
That’s a drag. Hope it gets back soon! Have you had any communication with them?
deadduck357
Custom
Hopefully soon.
Waveslayer
Operator
That is crazy. Mine did the same thing! About 30 rounds and gone!!! They told me 2 weeks, we shall see
deadduck357
Custom
Dang
Waveslayer
Operator
deadduck357
Custom
I'll hold out a bit longer before getting a Kuna and just keep rocking my Scorpion 3+.
Waveslayer
Operator
I like the Scorpion, but like the Kuna for what it is. You would think with HS making it, the quirks would be worked out
Waveslayer
Operator
I will have to watch out for the mags, I was eyeing the new metal lower to accept Scorpion mags, but for now, I a holding off
uspatriot1960
Professional
Anyone have any idea what would cause this? I’m not real familiar with the Kuna bolt. Is the extractor held in by a roll pin? Or is it just spring tension? I have a Kuna, but haven’t taken the bolt out to closely look at this. Wondering if it’s something we need to check for fit or possibly a part upgrade? Seems like a weird thing to have happen.
Sharks79
Custom
Thought pin but now second guessing myself. Will inspect tonight.
Waveslayer
Operator
It was an interesting conversation with the Customer Service rep. They would not send me a replacement extractor, in the manual says not to mess with the extractor. So I had to send the bolt into them... I wonder why that is, I didn't inspect it much, I was more pissed and just sent it off. I had a event I was going to use it, not now.