Looking to red dot everything I own that won't take a LPVO

[Bassbob]

I wonder why our experiences are so different? I've got three of them (two green, one red) and they never wash out.

You probably don't have the auto brightness mode on.

I had two different guys at my range at different times who thought theirs was broke or had dead batteries becuase the reticle wasn't even visible. I got them both working for them. By hitting the + several times until the reticles appeared.

 

[TEXASforLIFE]

I use the 1X and 3X on my subguns and a couple of rifles. Now I want to see them make that technology possible in a handgun. Etched reticle is the way to go for me.

They don't as of yet because of the lack of technology. PA needed to go 5x before they could etch.

Primary Arms SLx 5X MicroPrism™ Scope - Red Illuminated ACSS Aurora 5.56/.308 Reticle - Yard

This Primary Arms MicroPrism is part of the SLx optics line.

www.primaryarms.com

 

[SimonRL]

They don't as of yet because of the lack of technology. PA needed to go 5x before they could etch.

Primary Arms SLx 5X MicroPrism™ Scope - Red Illuminated ACSS Aurora 5.56/.308 Reticle - Yard

This Primary Arms MicroPrism is part of the SLx optics line.

www.primaryarms.com

Both the 1X and 3X are etched reticle.

 

[rcurtner]

Finally got the Holosun EPS 6moa green dot mounted on this M&P.

 

[TEXASforLIFE]

View attachment 59783
Finally got the Holosun EPS 6moa green dot mounted on this M&P.

what trigger is that

 

[rcurtner]

what trigger is that

Apex Tactical

 

[TEXASforLIFE]

Apex Tactical

thought so, but just checking. how do you like the reset and overtravel?

 

[TEXASforLIFE]

sorry, takeup not overtravel

 

[rcurtner]

sorry, takeup not overtravel

Zero takeup, zero over travel, very short reset. Trigger pull on this one averages 2.5lb's

 

[UC_Guy 1971]

Finally shipped off the CZ to DP Custom Works. I dont know why I have been delaying it. A new 407k X2 is going to be the optic. I'm not having it cerakoted. I'm going to put down some cold blue, followed by a brushed on coat of Fluid Film.

 

[SimonRL]

Finally shipped off the CZ to DP Custom Works. I dont know why I have been delaying it. A new 407k X2 is going to be the optic. I'm not having it cerakoted. I'm going to put down some cold blue, followed by a brushed on coat of Fluid Film.

I just had my P07 milled by Wager Machine Works for a K footprint. Had them blue the cut rather than Cerakote the whole slide. Got it back yesterday and it looks great.