Stainless Garrison Locked Up

[Okie John]

It locked up after one shot today. I'll call Springfield in the morning.


Okie John

 

[mreed911]

What, specifically, does "locked up" mean? New round in chamber? Old casing still in chamber? Slide back and won't move?

Definitely worth calling Springfield, but you're going to want to be much more descriptive.

 

[ultralinear]

This really, really sounds like a problem with the barrel link. With that few rounds, you may not see deformation yet. If it continues, I'd definitely send it to SA for a warranty claim with good details on what's happening.

Also: Double-check your ammo. Any chance it's overpowered and bulging the brass, making it hard to extract?

I agree and also wonder about the barrel bushing.

If the bushing fit (poorly) with a slight angle I have seen this happen. More common in the old days, however. As mree1911 wisely states it could be a slightly wobbly barrel link.

But, then you said: "Travel each direction was gritty and stiff."

I cannot imagine that being the case and there not being an issue with slide to frame fitment whether greased, oiled or dry. Even a tightly fit slide should not feel gritty.

 

[Old_Me]

It locked up after one shot today. I'll call Springfield in the morning.


Okie John

good....too much speculation as to the problem/issue.

send in the empty ammo casings for them to examine as well

if possible, send in the box end tabs that should have LOT numbers printed on them.

they will take care of the issue.

i question however, if the gun should be cleaned and lubed, or send it "as-is" so they can see right off an issue?

ask them, when you call...clean or dirty gun??

 

[Okie John]

Just sent it back to the mother ship.

I'll keep you posted.


Okie John