What are you doing right now??

[belladonna]

This morning when I got up...

Needless to say it'll be another no pants day today (well, that's a lie cuz I don't parade around the house without pants on - git that picture outa your heads ), I actually have a pair of wool leggings I wear because we keep the house temp at 68.

I feel the need to fondle guns so I'm going to strip a couple down just for **** and giggles, and then do some dry fire exercises later. Then maybe find a good movie or two to watch.

 

[youngolddude]

I got the Dillon email, too and ordered the parts kit for my 650. I'd like another press, but after 3 pistols, $500 worth of primers and a pending bullet order, I better not. I don't need or want a job to support my hobbies.

 

[NMEDGE]

This morning when I got up...

View attachment 73916

Needless to say it'll be another no pants day today (well, that's a lie cuz I don't parade around the house without pants on - git that picture outa your heads ), I actually have a pair of wool leggings I wear because we keep the house temp at 68.

I feel the need to fondle guns so I'm going to strip a couple down just for **** and giggles, and then do some dry fire exercises later. Then maybe find a good movie or two to watch.

68 degrees! I'd be wearing long underwear!

 

[Old_Me]

probably a "bare naked" setup that doesn't include dies and a toolhead, which is fine at that price.

i have like 6 tool heads, and all the pistol dies, and powder drop(s) here.

just need that roller handle and a cover...

bullet tray

then i'd have to order up a 4" stand at InLineFab

RL550C | Progressive Reloading Machine

The RL550C is the most versatile reloading machine in the Dillon lineup. It will accomodate the widest variety of cartridges from .32 ACP up to .338 Lapua, .416 Rigby, and .460 Weatherby. The "C" designation indicates a significant design change. The lower link arm pivot pin has a zerk fitting...

www.dillonprecision.com

 

[NMEDGE]

Just got my first in-stock email for HK CC9 from grabagun. Only problem they want full price $699. Think I will wait and see. Just hate paying full price for a gun.

 

[belladonna]

Just got my first in-stock email for HK CC9 from grabagun. Only problem they want full price $699. Think I will wait and see. Just hate paying full price for a gun.

Yeah, they know that those that are desperate for one “right now” will pay full price. Patience is a virtue

 

[NMEDGE]

Yeah, they know that those that are desperate for one “right now” will pay full price. Patience is a virtue

I'm not known for that but will give it a try this time.

 

[BassCliff]

Hi,

Thank you for your indulgence,

BassCliff

 

[youngolddude]

Hi,

View attachment 73917


Thank you for your indulgence,

BassCliff

Bingo! I cheated.

 

[Annihilator]

Ordered a holster for my birthday, should be here by Friday.

Happy Birthday!

 

[Bassbob]

Pigtail. It’s about 17 degrees. Went through a lot of extra work to keep the customer’s service hot while we do most of our work. Taking a short break now but if all goes as planned I’ll only have the gas down for about 45 minutes. I had them crank their heat up in the meantime.

 

[Blackfeather]

I ordered some luxurious comfort for my Toyota sport truck... the new coffee colored sheepskin seat covers should be here in about two weeks. These aren't the shaggy seat covers from the 80's, these are vehicle specific, air bag compliant custom fitted seat covers that are cool in the summer, and warm in the winter.

 

[Kir]

Just curious as to who is going to pay to change all the maps from Gulf of Mexico to Gulf of America. If that is the case shouldn't America be called Amerigo after Amerigo Vespucci?
Well they say that to the victor belongs the spoils, but we get new victors every 4 or 8 years. I forsee lots of changes in the future; short term and long term.

 

[Belt Fed]

Is a SA tanker brand new worth 1800 out the door? good lookin rifle.

 

[powerboatr]

dealer called parts are in.........has no idea if they are actually on the darn truck
has to call back
i would go visit in person, but its cold out, and its an hour away and its freaking cold out, and its cold out

 

[Old_Me]

I got the Dillon email, too and ordered the parts kit for my 650. I'd like another press, but after 3 pistols, $500 worth of primers and a pending bullet order, I better not. I don't need or want a job to support my hobbies.

yeah i know....i gave it great thought, and even imagined it on the bench, where the Lee is now...but i too will most likely wait longer as well.

 

[Old_Me]

just loaded up my range bag for 2 possible trips tomorrow..

i usually go to the club on mondays, but this being a holiday, i'll figure that those that are working have the day off and will go.

so hopefully, the club in the morning at 6:30, then the public range at 10...only taking 1- 1911 (S&W Series E) to both places

still have about 300 rounds of lead ball to shoot, before the new "lipstick" ball ammo is moved into the ready line.

 

[Belt Fed]

Waitin on a guy to send me a pic of a tiger stripped black rain AR15 that is supposed to come in today. don't look as if it's going to make it.

 

[powerboatr]

In South Texas our winters are usually not bad at all. The next three days our low temps are going to be in the low 20's & high teens. In fact we may get snow on Wednesday, crazy.

a number of years ago we spent good part of january in Galveston...eating and stuff
on our way NORTH to houston as we made our way towards San Antonio
we got hit with ice, sleet in houston and spent the night near the colorado river to awaken with snow, ice every where
it was so weird, coming from 75 f Galveston

eventually made to big sisters house in la feria and it was HOT

crazy winter that was

 

[powerboatr]

I got the Dillon email, too and ordered the parts kit for my 650. I'd like another press, but after 3 pistols, $500 worth of primers and a pending bullet order, I better not. I don't need or want a job to support my hobbies.

man they punched us all this morning
i was trying to NOT look at it, but now i see i must