testtest

good day at the range

BassCliff said:
Hey!



You guys sure know how to have a good time. Maybe if I got out in the fresh air and sunshine more often, I could shoot more like you guys. Nice work.

Those 3D cardboard silhouettes are cool. I'm going to see if I can hang them at my indoor range. I like a variety of targets. Thanks for sharing your fun!

Thank you for your indulgence,

BassCliff
Click to expand...
All our indoors around said no go on those 3d targets. Been in garage for years. Finally took them outdoor range
 
KillerFord1977 said:
Went outdoor range today with @SimonRL .
101 degrees at noon 😬💥💥🥴

Some pistol work from draw with rapid fire sessions. Shoot n move. Sub guns, and my new 6.8 w thermal and Simons M1A.
Good day but a blazing hot in the full sun . 3D tactical dude took a rapid fire beating.
10 yrds pistol
50 yrd rifle

we were drenched in sweat. it was brutally hot. I feel for all those in tactical gear this time of year or in the sand box.

View attachment 112494View attachment 112495View attachment 112496View attachment 112497View attachment 112498
Click to expand...
You’ve got that Clint Smith target going in “shootem in the crouch.”
 
Honestly, shooting steel plate after doing 4” targets for ages was like boring as hell. Speed drill on plate was “mundane” even on various strings. And fast as they could go from holster draw. 4 mags was about 1 min. That was a lot of ammo. Had to slow way way down.
Went to the large cardboard with triple to lower, single middle and single head as quick as I could get the rounds off at 10 yrds

IMG_4442.jpeg
 
Last edited:
Woo Hoo!

KillerFord1977 said:
Hit the range this week end. HK /Clone day. Alot of the indoor ranges allow FRT now. As long as you can show you can keep it on a torso target.

Ap5 with FRT. 10-15 yrds. 4 mags
View attachment 113132

Ap5p and ap53 work. (All nfa sbr)

View attachment 113133View attachment 113134

Overall a great day out at the range for fathers day.. 🤠🇺🇸🇺🇸🕺
Click to expand...

That looks like a lot of fun. Brrrrrrrtt! Instant big raggedy hole. :D

I bought an FRT for my little TX22 TORO, been thinking about installing it. If everything works out then I might move on to something bigger. ;) Thanks for sharing your fun.


Thank you for your indulgence,

BassCliff
 
BassCliff said:
Hi,



Yep! Nice work. With the exception of a couple flyers, I'd say your reloads are just as accurate as the factory ammo. Cheers!


Thank you for your idulgence,

BassCliff
Click to expand...
yesh, i keep saying "i gotta start reloading"

but i gotta remember.....


to get started....!!!!!!

i am down now about 800 rounds of 45 ACP, and down about 700 rounds of 9mm....(+/-) those figures


i still ain't even tried to reload Colt 45 or .38 specials yet.


my knee is making climbing and descending stairs painful.
 
Went with daughter and @SimonRL for range day today. Day early since Friday is a no go.
Daughter wanted to shoot her new CZ PO9 Nocturne and I wanted to work on some speed drills.


Daughter was shooting a tad high, but was not used to the trigger on this CZ. Trigger job in the near future, but she bored out a nice set of holes around bull. 7 yrds.



IMG_4564.jpeg


We thought maybe RDS was a bit off, but Simon confirmed that is not the case with one shot bull test fire.. (left center


IMG_4562.jpeg


Did some speed drills with the Baer Drill.
I did 7 yrds. 5 rds right square. Slide stop. Fast Reload. 5 rds left square. 3 rds center. 5 seconds or under for 5 rounds into each separate gray square. Under 5 seconds for 3 rds center “baer” logo.
Squares are 5” and center logo is 2”

Threw 2 rds high on the squares. Threw 4 rds off baer logo.
very rusty, but I’ll take it 🙂
IMG_4566.jpeg

3” circle splatter above baer drill was 10 yrds speed shoot from low ready.

Great day all in all with Simon and daughter
 
Hi,

KillerFord1977 said:
Went with daughter and @SimonRL for range day today. Day early since Friday is a no go.
Daughter wanted to shoot her new CZ PO9 Nocturne and I wanted to work on some speed drills.


Daughter was shooting a tad high, but was not used to the trigger on this CZ. Trigger job in the near future, but she bored out a nice set of holes around bull. 7 yrds.



View attachment 113363

We thought maybe RDS was a bit off, but Simon confirmed that is not the case with one shot bull test fire.. (left center


View attachment 113364

Did some speed drills with the Baer Drill.
I did 7 yrds. 5 rds right square. Slide stop. Fast Reload. 5 rds left square. 3 rds center. 5 seconds or under for 5 rounds into each separate gray square. Under 5 seconds for 3 rds center “baer” logo.
Squares are 5” and center logo is 2”

Threw 2 rds high on the squares. Threw 4 rds off baer logo.
very rusty, but I’ll take it 🙂
View attachment 113367
3” circle splatter above baer drill was 10 yrds speed shoot from low ready.

Great day all in all with Simon and daughter
Click to expand...

Nice work. Fun day with family and friends. You Texans sure shoot good.


Thank you for your indulgence,

BassCliff
 
KillerFord1977 said:
Went with daughter and @SimonRL for range day today. Day early since Friday is a no go.
Daughter wanted to shoot her new CZ PO9 Nocturne and I wanted to work on some speed drills.


Daughter was shooting a tad high, but was not used to the trigger on this CZ. Trigger job in the near future, but she bored out a nice set of holes around bull. 7 yrds.



View attachment 113363

We thought maybe RDS was a bit off, but Simon confirmed that is not the case with one shot bull test fire.. (left center


View attachment 113364

Did some speed drills with the Baer Drill.
I did 7 yrds. 5 rds right square. Slide stop. Fast Reload. 5 rds left square. 3 rds center. 5 seconds or under for 5 rounds into each separate gray square. Under 5 seconds for 3 rds center “baer” logo.
Squares are 5” and center logo is 2”

Threw 2 rds high on the squares. Threw 4 rds off baer logo.
very rusty, but I’ll take it 🙂
View attachment 113367
3” circle splatter above baer drill was 10 yrds speed shoot from low ready.

Great day all in all with Simon and daughter
Click to expand...
I miss the days when me and my son would go to the range at least once a week. Awesome shooting.
 
You must log in or register to reply here.
Back
Top