testtest

Let's see your AR setups...

DSCF3811.JPG
 
Here is an updated picture of my two
AR Pistols.
Top Saint Victor in 300 BO
Bottom Saint Edge in 5.56
Both setup with same hardware with
Exception the Victor has a Vortex
SpitFire and the Edge sports the Vortex
StrikeFire. Recently added is Magpul Angled forearm brace and QD swivels for a sling on the Forearm below the light.
6E845386-8D61-470C-93DC-CAFEB3F7A808.jpeg

Two more swivels shown are for my full size AR Saint in 5.56 and my Savage AR10 chambered in .308
 
Updated SPR.

Updated SPR.jpg


So, from the last time I posted this I've replaced the upper and lower receivers, new stock, new barrel, new bipod, and that's it I think.

Upper Receiver:
Vltor MUR
BCM KMRA-13
White Oak 18" SPR, RL Gas, 1:7 Twist
PRI QC Brake
Aero Precision Low Pro Gas Block
BCM Gas Tube
BCM BCG
Radian Ambi Charging Handle
BCM Pic Rails, Rail Covers, and Sling Mounts

Lower Receiver:
Aero Precision Gen II Lower
SOLGW LPK
Geissele SSA-E
Ergo Deluxe Grip
Magpul MOE Triggerguard
BCM Intermediate RE
Vltor A5 Buffer and Spring
BCM Mod 1 SOPMOD

Optic:
NF ATACR 4-16X42
NF Unimount

It shoots pretty good too, I did a test with three different kinds of match ammo and the average out of seven 5-shot groups was .98"


Updated SPR Groups.jpg
 
I was fooling around upstairs and decided to get some pics of a couple of my other blasters.

Recce:
BCM M4 upper, KMR-A-13, Rail Covers, Sling Mount, and Charging Handle
White Oak 16" ML, 1:7, .223 Wylde
Griffin Armament Tactical Compensator
Toolcraft BCG
Magpul Pro Offset Sights
RRA Lower
Geissele SSA-E
Ambi Safety
Sierra Precision Grip
Vltor Emod Stock
H1 Buffer and Standard Carbine Spring
NF 2.5-10X24 & NF Unimount

Recce.jpg


General Purpose Carbine:
Aero Precision Lower, Atlas S-One Handguard
BCM Blem Upper
Brownells 16" ML, Gov Profile Barrel, 1:8 Twist
Brownells A2 FH
Brownells BCG
BCM Charging Handle, KAG, Mod 3 Grip
Stag LPK? I put that lower together about 8 years ago\
Magpul MBUS Sights
Magpul SL Stock
Aimpoint CompM and QRP2 Mount
Streamlight Weaponlight and BCM Keymod Scout Light Mount

GP Carbine 1.jpg


Buds...
Blasters.jpg
 
PSA ks47

Mods
Vg6 precision gamma muzzle brake
Odin works mlok flashlight mount
Streamlight hl 750 lumen light (not installed yet)
American defense micro dot qd mount
Holosun 503gu elite green dot
Magpul gen2 back up iron sights (od green )
Magpul moe+ grip od green
Magpul ctr stock with limbsaver pad od green
Battle arms development take down pins
Battle arms development ambi safety
Velocity triggers qd end plate (od green)
Radian raptor charging handle od green
Soe gear single point sling

The muzzle brake, gas tube, mlok handguard, american defense mount, take down pins, streamlight hl 750 lumen light were all blasted, kphosed, and then kg gunkoted magpul od green and baked on.

The upper, lower, gas block, and barrel were all blasted, kphosed, kg gunkoted in magpul fde and baked on.

The coating was done by James Nicholas aka xdman on this site. Im extremely pleased with it.
f7402cfbea7be479967c8bd59535f0fd.jpg
c6d8d419b4dc89c59305f603e341be1d.jpg
fe53aeafd3e0ef302dfe14bb96221f5d.jpg
d67bc75406ebfdd3e12d232f1369f75a.jpg
f865e0732fce0ecb0a5ee5e80d37b08b.jpg


Sent from my SM-G930V using Tapatalk
 
PSA ks47

Mods
Vg6 precision gamma muzzle brake
Odin works mlok flashlight mount
Streamlight hl 750 lumen light (not installed yet)
American defense micro dot qd mount
Holosun 503gu elite green dot
Magpul gen2 back up iron sights (od green )
Magpul moe+ grip od green
Magpul ctr stock with limbsaver pad od green
Battle arms development take down pins
Battle arms development ambi safety
Velocity triggers qd end plate (od green)
Radian raptor charging handle od green
Soe gear single point sling

The muzzle brake, gas tube, mlok handguard, american defense mount, take down pins, streamlight hl 750 lumen light were all blasted, kphosed, and then kg gunkoted magpul od green and baked on.

The upper, lower, gas block, and barrel were all blasted, kphosed, kg gunkoted in magpul fde and baked on.

The coating was done by James Nicholas aka xdman on this site. Im extremely pleased with it.
f7402cfbea7be479967c8bd59535f0fd.jpg
c6d8d419b4dc89c59305f603e341be1d.jpg
fe53aeafd3e0ef302dfe14bb96221f5d.jpg
d67bc75406ebfdd3e12d232f1369f75a.jpg
f865e0732fce0ecb0a5ee5e80d37b08b.jpg


Sent from my SM-G930V using Tapatalk
I painted the mag and floor plates.

Sent from my SM-G930V using Tapatalk
 
Back
Top