Ayoob: My Custom 1911 by Mike Plaxco

By Massad Ayoob
Posted in #Guns
Save
Save Remove from saved articles
Like
Like Unlike
Share
Facebook Share Twitter Share Pinterest Share

Ayoob: My Custom 1911 by Mike Plaxco

November 19th, 2026

7 minute read

Like most who knew the man, I was stunned and saddened on the day in 2023 when I learned that Mike Plaxco had died, just shy of his 70th birthday. In his day, he had been a giant – in pistol shooting, in teaching that art, and in building the guns for it.

Massad Ayoob shoots his Mike Plaxco 1911 at Pin Shoot
Massad Ayoob shoots his Mike Plaxco custom Springfield 1911 at the Pin Shoot. Even with 230-grain +P .45 ACP loads, muzzle rise is minimal thanks to the expansion chamber compensator. Image: Gail Pepin

Born in Little Rock in 1953, Mike retained both his Arkansas accent and his laid-back, practical way of living. Before IPSC, the International Practical Shooting Confederation, morphed into its American iteration, the US Practical Shooting Association, he was The Man to Beat.

And his skills weren’t limited to that one game.

Plaxco the Teacher

In his moving tribute to Mike in American Handgunner magazine, shooter and gun writer Dave Anderson said, “Plaxco was also a highly intelligent and articulate person. He had an analytic mind, he could figure out what worked and why, and he could communicate his ideas. I don’t think he had any formal training as a teache,r but he seemed to understand the basics of effective teaching, one of which is repetition. He expanded his teaching notes into an excellent book, ‘Shooting from Within’.”

Mike Plaxco custom 1911 in 45 ACP
This Mike Plaxco custom 1911 was built using a Springfield Armory 1911. It is owned by the author who has shot it in many matches over the years. Image: Gail Pepin

In the mid-1980s when I was running Lethal Force Institute in New Hampshire, I brought Mike in to teach a shooting class. He was a wonderful instructor, patient with those of all levels of shooting skill. He focused on the basics. “Accuracy first, then speed” was his mantra.

Plaxco did not lock himself into one shooting technique. When he taught the above-mentioned class, he personally favored the Chapman stance, a modified Weaver stance in which the gun arm was locked out like a rifle stock while the bent support arm pulled the gun arm tightly into the shoulder socket, and for which he gave full credit to former World Champion Ray Chapman at Chapman Academy in Columbia, MO. The same stance is seen in the picture of him taken when he won the Second Chance shoot in 1984. Later photographs show him firing from Isosceles with both arms extended.

Plaxco compensator compared to DR Middlebrooks compensator
While it was extremely effective, the Plaxco compensator (left) eventually gave way to more even more efficient comps like the one by D. R. Middlebrooks (right.) Image: Gail Pepin

Mike wasn’t afraid to challenge norms. At a time when it was gospel to keep your head up when shooting and bring the pistol up to line of sight, Mike was known to tilt his head forward when shooting his winning scores. In a time of iron sights, this helped him focus on the front sight and reduced the likelihood of a too-high shot, as explained in my Tactical Turtle article.

He told students, “If you’ve hit a plateau in your shooting and aren’t getting any better, you might want to change something — a different stance, a different grip, a different gun. It will force you back to focusing on basics, and that will make you shoot better.”

Plaxco’s Guns

We’re talking about the only guy I ever knew who hit the triple crown of winning the IPSC National Championship, the World Speed Shooting Championships at the Steel Challenge, and the prize-rich Second Chance Combat Shoot, all in the same year! It was Mike who won those things. His guns didn’t do it by themselves. That said, though, he constantly quested for ways to make those guns shooter faster and straighter.

Plaxco compensator installed on a Springfield Armory 1911 pistol
The famed Plaxco compensator installed on a Springfield Armory 1911 pistol. The comp was very effective at reducing muzzle rise and felt recoil. Image: Gail Pepin

The result was the famous Plaxco compensator.

In the early days of the International Practical Shooting Confederation (IPSC), it was generally accepted that .45 ACP was the caliber to use to take advantage of the scoring bonus a so-called “major caliber” offered. Since the game put heavy emphasis on fast double-taps, shooters sought ways to tame the .45’s recoil.

top view of Plaxco compensator and Middlebrooks comp
When viewed from the top, the differences between the Plaxco compensator (left) and the Middlebrooks comp (right) are notable. Image: Gail Pepin

Shooting heavy loads in bowling pin matches, Mike’s contemporary John Shaw went to Jim Clark, Sr., and convinced him to create the first “Pin Gun,” a 1911 .45 with a heavy weight projecting from the muzzle, which held it down somewhat during recoil. Another of Michael’s contemporaries was Bill Wilson, who was an accomplished shooter and customizer of 1911s before he became a manufacturer. Wilson came up with the Accu-Comp, which vented expanding gases upward to drive the muzzle downward.

Mike Plaxco custom 1911 with larger thumb safety burr hammer and beavertail grip safety
Plaxco gave Ayoob’s 1911 a slightly larger thumb safety, burr hammer and beavertail grip safety. Image: Gail Pepin

In Bill Wilson’s book “The Combat Auto” from 1991, on pages 121-123 notes that Jim Clark’s barrel weight pin gun was followed by Wilson’s Accu-Comp, which he described as “an effective porting system that reduced muzzle jump and felt recoil.” He adds, “The third development in the history of the compensator was the rise of the expansion chamber compensator, initially popularized in this country by J. Michael Plaxco.

“The Plaxco compensator concept was a way around the complexity of an Accu-Comp or a Pin Gun. In many ways, an Accu-Comp or a Pin Gun is a redesigned Colt, with different bushing systems and recoil spring systems in addition to the obvious modifications. The Plaxco comp however, was an add-on accessory to a stock gun, replacing the barrel but maintaining the standard bushing set-up.”

I shot a Plaxco comp gun in .45 and immediately had to have one. Mike at the time felt only two brands of 1911 were built well enough for him to do his best work on, Springfield Armory and Colt. It was the mid-1980s, and the Springfield Armory 1911 had only recently been introduced. I went out and bought one and sent it to Mike unfired. Springfield Armory .45 serial number 3756 came back as something special.

Plaxco had installed BoMar sights, both rugged and precisely adjustable. He had done an excellent job of installing a match trigger with a 4’ish-lb. trigger pull. He fitted a Bar-Sto barrel to enhance accuracy.

And then there was that wonderful recoil compensator.

match trigger installed in Mike Plaxco custom 1911 pistol owned by Massad Ayoob
Mike Plaxco installed a match trigger in the custom 1911 pistol owned by Massad Ayoob. Image: Gail Pepin

Like earlier comps, it vented upward the expanding gases propelling the bullet, which of course drove the muzzle downward, allowing much faster return of sight picture for the next shot. However, something else was happening in that expansion chamber which was hanging off the business end of the barrel.

As the bullet passed the end of five inches of the rifled barrel and into the expansion chamber, those gases spread out. The bullet passed through its hole at the far end of the chamber and went on its way to the target, but that violently expanding gas hit the steel wall around the compensator’s bullet exit point, driving the comp and therefore the whole gun forward to counter the rearward recoil impulse.

Mike Plaxco retained the original Browning bushing system with his custom 1911 pistols
Mike Plaxco retained the original Browning bushing system with his custom 1911 pistols. Image: Gail Pepin

The result? Dramatically less rearward “kick” as well as reduced muzzle rise. Thus, the magic of the expansion chamber recoil compensator as popularized by J. Michael Plaxco.

Just how much does it tame the gun? Recoil is, of course, subjective. But allow me to offer some photos. At the last Pin Shoot in June of 2026, after I shot the Pin Gun event with my Plaxco gun, a fellow named James Beswetherick came up to me and my wife and said, “I photographed you while you were shooting, and I think I’ve got a picture of the bullet in the air.” I thought at first he meant an ejected casing, but by golly, his super-fast lens had actually captured the bullet in flight.

photo of Federal Hydra-Shok bullet in flight from Mike Plaxco custom Springfield Armory 1911 shot by Massad Ayoob
Federal Hydra-Shok .45-caliber bullet in flight from Massad Ayoob’s custom Springfield 1911. Note the lack of muzzle rise as the slide is just starting to come back. Image: James Beswetherick/Dale’s Vineyard Photography

The photo appears here. The 230-gr. Federal HST .45 ACP hollow point at the +P nominal velocity of 950 feet per second is indeed in flight toward the pin table. The slide of the Plaxco gun is just starting to move to the rear, pushing the burr hammer back … and the muzzle is still level with the targets.

In the 40 or more years I’ve had it, that Plaxco gun has more than paid for itself. Back in the day it won me several steel plate matches, and it helped me win a major bowling pin match for charity in Montreal. I brought it to every pin match I entered after I acquired it.

Plaxco’s Legacy

J. Michael Plaxco. He was “Mike” to his shooter friends and “John M. Plaxco” to business associates. He was the kind of man you wanted for a friend, a neighbor, a team-mate. We were all proud to have him as a champion of our chosen sports. Mike was a hell of a gunsmith, and a great thinker in the world of action handgun shooting. Amazon should still be able to get you a copy of his book on the last topic, titled “Shooting From Within.”

I miss him, and doubtless so does everyone else who knew him. He has left behind him custom guns which, like his approach to shooting, still endure.

Editor’s Note: Please be sure to check out The Armory Life Forum, where you can comment about our daily articles, as well as just talk guns and gear. Click the “Go To Forum Thread” link below to jump in!

Join the Discussion

Go to forum thread

Continue Reading
Did you enjoy this article?

Springfield Armory® recommends you seek qualified and competent training from a certified instructor prior to handling any firearm, and to be sure to read your owner's manual. The views and opinions expressed on this website are those of the authors and do not represent the views and opinions of Springfield Armory.

Product prices mentioned in articles and videos are current as of the date of publication.

Massad Ayoob

Massad Ayoob

Massad Ayoob is a renowned firearms expert with decades of experience in the firearms community. He's the author of more than a dozen books and hundreds of articles and has extensive experience as a law enforcement officer, competitive shooter and expert witness.

© 2026 Springfield Armory. All rights reserved.

Springfield Armory
Login

No account? Create One

Create Account

Have an account?