Model 2020 Action Custom Build Project

By Jeremy Tremp
Posted in #Guns
Save
Save Remove from saved articles
Like
Like Unlike
Share
Facebook Share Twitter Share Pinterest Share

Model 2020 Action Custom Build Project

November 16th, 2026

9:08 runtime

When it comes to the perfect bolt-action rifle for you, would you rather build from parts or buy a complete rifle?

I’ve been lucky enough to review and get first looks at every Springfield Armory Model 2020 variant since the original Waypoint rifle was released in 2020. I even took the original Waypoint rifle to a five-day “Sniper School” course to push the rifle to it’s limits. To this day that is still one of my most trusted rifles.

Springfield Armory Model 2020 Short Action
Springfield Armory now sells the stainless steel Model 2020 Action as a stand-alone part. It ships “in the white,” ready for whatever finish and build you have in mind and is available in shot- and long-action versions.

I’ve shot these rifles chambered in .22, .308, 6.5 CM and 7mm PRC. Each rifle has performed beyond the standards set forth by Springfield. The action is incredibly smooth, reliable and easy to upgrade, being that it’s based on a Model 700-pattern action.

Some of these rifles I have kept bone stock, such as the Redline and the Boundary, as they are excellent hunting rifles that I prefer to keep very minimalist. Others I’ve swapped triggers and chassis, added suppressors and even thermal optics.

Springfield Model 2020 action with bolt and barrel on a workbench
The Model 2020 Action, its bolt and the Proof Research barrel sit on the bench before assembly. The action arrives as raw stainless steel with no coating.

I’m one of those people who has a hard time not configuring all of my firearms to my preferred parts, pieces and trusted accessories. Because of this, I was thrilled to hear Springfield was offering the stainless steel Model 2020 Action as a stand-alone part. Now, I would get to build the rifle of my dreams with the action I have the most familiarization and trust with, test it out and also write a story about the process. What’s not to love?

The Details

The Model 2020 Action comes “in the white,” meaning raw metal with no coating. It’s truly meant for those who demand the ultimate performance and customization of their rifles for whatever their purposes. Also, it is the serialized part of the firearm, so it must be transferred through an FFL like any other firearm.

gunsmith fitting the Springfield Model 2020 action to the barrel on the workbench
Fitting the barrel to the action was the most demanding step of the build. Magnum Mike took his time to make sure the headspace was perfect.

As noted, the Model 2020 action has the popular Model 700 footprint, so it will fit scope bases and accept triggers for that commonly available design. A low-profile, two-position safety blocks the trigger but permits bolt manipulation.

gunsmith at work bench building the rifle for the author
The author handed the build to Magnum Mike, who has been working on guns for about as long as the author has been alive. Mike regularly builds bolt guns for PRS shooters and once-in-a-lifetime hunts.

The bolt and receiver are machined after heat-treating to ensure the dimensions of the finished steel match specifications. The bolt is nitrided for wear and corrosion resistance. The spiral-fluted, two-lug bolt glides in raceways electrical discharge machine (EDM) cut into the stainless receiver. The Waypoint’s recoil lugs are integral with the receiver ring, and four 6-48 screws and two recoil pins secure the included Picatinny top rail.

My Project

Personally, I really enjoy the “practical tactical” set up and decided on that approach for this project. This set up for me generally means an 18-20” barrel, suppressor, bipod, chassis with adjustable cheek riser and adjustable length of pull. The rifle should be something I could take on a hunt, shoot a match, or just dial in precise groups on the range. It’s neither a lead sled meant to never move under recoil or a super lightweight pack rifle.

all of the rifle components with the barreled action on the workbench
The full parts list comes together around the barreled action. It includes a KRG Whiskey 3 chassis, Triggertech Diamond trigger, KGM R65T suppressor and Nightforce ATACR optic.

So, when dreaming up my perfect rifle I went through the list of manufacturers that create some of the finest parts on the market and started a shopping list for what would become my 6.5 Creedmoor rifle:

  • Barrel: Proof Research Carbon Fiber 6.5 CM Sendero 20” 1:8 Twist.
  • Chassis: KRG Whiskey 3 Folding Stock.
  • Trigger: Triggertech Diamond Single Stage
  • Suppressor: KGM R65T
  • Bipod: Atlas B&T Bipod
  • Optic: Nightforce ATACR 4-20×50 MIL XT

Now that I had all my parts picked out and they had arrived, it was time to take them to a professional gunsmith to ensure everything was perfectly assembled and fit with precision.

gunsmith assembling the custom rifle chassis
Magnum Mike installing the barreled action in the KRG Whiskey 3 folding chassis. The action beds into aluminum, while the folding mechanism uses steel for strength and durability.

While I fancy myself a capable amateur gunsmith, this was a task best left for the pros. I chose the best guy in town, Magnum Mike. Mike has been working on guns for probably as long as I have been alive. He’s also probably forgotten more than I have known about different platforms and all the nuances of how they work. Mike builds bolt guns for once-in-a-lifetime hunts as well as PRS shooters all the time. I knew my trust in him was well-founded.

Hands-On

Most of the build was very easy and intuitive. The real precision and talent came to fitting the barrel to the rifle and ensuring the headspace was perfect. Mike painstakingly worked on this process, making sure it was absolutely perfect before affixing the barrel to the action.

custom rifle built with Springfield Model 2020 action
The action was Cerakoted in FDE to match the KGM R65T suppressor. The result is the black-and-tan look the author was after.

Once we had the barrel on the action, it was time to send it off to Cerakote. For this build I really wanted to go for a black and tan look, and thankfully the KGM suppressor already came in a great FDE color. I told Mike I wanted the Model 2020 action to match that same FDE color. A week later it was back and ready for full assembly. He installed the trigger, the chassis and finally the optic, ensuring it was perfectly level and in the correct position for proper eye relief.

With the rifle complete, it was time to take it to the range and begin testing. Every time I get a new precision rifle I take it to the range to see which weight bullet the rifle prefers. You would be surprised how nuanced this can be. My ammo of choice for precision shooting is Black Hills Ammo, as they are second-to-none when it comes to precision and quality. I grabbed 130-gr. Dual Performance, 143-gr. ELD-X, and 147-gr. ELD-M.

author shooting the custom rifle built on a Model 2020 action
The author tested the rifle with three Black Hills loads to see which bullet weight it preferred. Shooting started from prone before the author moved to the bench.

I’ve shot a lot of Black Hills 6.5 CM rounds through my rifles, and I’ve often found the 147-gr. bullets to be the most accurate. So, I began there thinking I would find the most success. I then shot the 143-gr.- and finally the 130-gr. rounds. To my surprise, the best groups were from the 130-gr. Dual Performance.

My groups were as follows:

  • BHA 147-gr. ELD-M: 0.62 MOA
  • BHA 143-gr. ELD-X: 0.67 MOA
  • BHA 130-gr. Dual Performance: 0.52 MOA

I dialed in the rifle shooting from prone, then took it to a bench range and finally to a scenic valley with targets from 200 all the way out to 1,300 yards. The rifle was everything I had hoped for from the start — incredibly accurate, comfortable, repeatable and ultimately trustworthy.

Let’s talk about the specific parts and how they performed.

Performance

This is my very first Nightforce scope, and boy has it lived up to the name and legacy. The field of view and clarity on this 4-20X is incredible. As accurate as a rifle can be, without a good scope you will never produce repeatable and precise groups. The ATACR 4-20 makes this simple.

small group on paper showing the accuracy potential of the custom rifle with the Model 2020 action
The rifle shot well under 1 MOA with all three Black Hills loads tested. The best result was 0.52 MOA with the 130-gr. Dual Performance.

The MIL XT reticle is crisp and detailed while not being so cluttered as to obscure the target. The fine point in the middle is easily discernable and easily seen, while the tree gives you fast windage and elevation holds. I’ve toured the Nightforce facility and have seen these optics tested and assembled. After using one, I can say I have complete trust in this optic to hold zero in any situation I might find myself in.

Kinetic Research Group (KRG) has been on my radar for years as one of the finest chassis systems on the market. The style and practicality of the Whiskey 3 is unparalleled. Utilizing polymer aluminum and steel components, this is one of the most rigid and adjustable stocks you can find. The action beds into aluminum while the folding mechanism utilizes steel for strength and durability.

One of the most important aspects of a precision rifle chassis is the ability to adjust the cheek comb height and the length of pull. The Whiskey 3 offers these toolless adjustments on the fly. The cheek comb can even be moved forward and rearward depending on your length of pull and position behind the rifle. Other adjustments, such as the buttpad, can be moved vertically as well as twisted 15 degrees to the left or right.

completed custom rifle with Springfield Armory Model 2020 action
The finished rifle wears a KRG Whiskey 3 folding chassis with an added Arca rail. That setup supports a bipod, tripod, rear bag and sling.

I also installed the Arca Rail from KRG so that I can utilize my Two Vets tripod as well. The KRG Whiskey 3 is comfortable and feels natural when mounting the rifle. The chassis is everything I wanted in a precision platform and creates the perfect platform for attaching bipods, rear bags, tripods, slings, and more.

Proof Research delivers. The barrels they provide are incredibly accurate, repeatable and, best of all, durable. You can shoot a string of 10 or more shots back-to-back and still retain accuracy with a Proof carbon fiber barrel. The carbon fiber barrels are about 60% lighter than a steel barrel alternative. This certainly helps when trekking around on a long hunt. There are a lot of accurate barrels out there, but the Proof barrels can take the abuse and keep on performing.

KGM makes some of the finest suppressors on the market, and I was incredibly stoked to finally be able to put one through the paces. I first heard of KGM through world-renowned competitive shooter Sean Murphy. Sean, along with his shooting partner Greg Hamilton, has won more precision rifle awards than I could count. If guys like that trust a product and continue to win with it, there has to be something there.

The R65T is made from titanium and laser welded for durability. I went for a 6.5 CM-dedicated suppressor because it will live on this rifle forever. The R65T is lightweight, quiet, and offers excellent flash mitigation and gas flow. Another really unique feature is the adjustable port end cap that allows you to add small screws to adjust gas flow for recoil control.

Springfield Armory Model 2020 Short Action Data Sheet
The Model 2020 Action is built for shooters who want to choose every other part themselves. Short Action variant shown.

Triggertech Diamond is the premier name in precision shooting platforms. There is a reason many competitive shooters trust the Diamond trigger to get them to the podium. I dialed my trigger in at 1 lb. The trigger itself is comfortable and the pull is smooth and tactile. There really isn’t that much more to say about a great trigger. It absolutely aids in accuracy, ensuring your shots go exactly where you want them with as little human input as possible. I couldn’t be happier with the feel and performance of the Triggertech Diamond.

Conclusion

Overall, I couldn’t be happier with how this build came together. This rifle is quite special to me as I picked out each part, watched the build process and then did all the testing and data collection. I’m looking forward to running this rifle in some precision classes and maybe a few matches in the near future.

If you’re looking to build out a precision rifle with one of the best actions on the market, I would suggest checking out the Model 2020 Action for your next project.

Editor’s Note: Please be sure to check out The Armory Life Forum, where you can comment about our daily articles, as well as just talk guns and gear. Click the “Go To Forum Thread” link below to jump in and discuss this article and much more!

Join the Discussion

Go to forum thread

Continue Reading
Did you enjoy this video?

Springfield Armory® recommends you seek qualified and competent training from a certified instructor prior to handling any firearm, and to be sure to read your owner's manual. The views and opinions expressed on this website are those of the authors and do not represent the views and opinions of Springfield Armory.

Product prices mentioned in articles and videos are current as of the date of publication.

Jeremy Tremp

Jeremy Tremp

Jeremy Tremp is a filmmaker/photographer who turned his passion for the firearms industry into a dream job. Having identified a need in the 2A space, he and some like-minded friends started Offensive Marketing Group to help bring their unique skillsets to an industry in dire need of "outside of the box" marketing approaches. One of the perks is getting access to some of the best gear and training in the industry. In his spare time, he loves to be at the range testing gear and learning to be a better shooter, firearms advocate and content creator. Tremp is the winner of the 2023 Cantius Award.

© 2026 Springfield Armory. All rights reserved.

Springfield Armory
Login

No account? Create One

Create Account

Have an account?